Lenovo M58p User Guide - Page 28
Installing, drive - thinkcentre ()
UPC - 884343322902
View all Lenovo M58p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing a drive in bay 2 Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to install a drive in bay 2. To install an optical drive or an additional hard disk drive in bay 2: 1. Open the computer cover. See "Opening the computer cover" on page 12. 2. Remove the metal shield from the drive bay by using a flat-blade screwdriver to gently pry it loose. 3. If you are installing a drive with accessible media, such as an optical drive, remove the plastic panel in the bezel by squeezing the plastic tabs that secure the panel on the inside of the bezel. Note: If you are installing a 3.5-inch hard disk drive, you must use a Universal Adapter Bracket, 5.25 to 3.5-inch. You can obtain this bracket from a local computer retailer or by contacting the Customer Support Center. 4. Install the optical drive retainer on the left side of the drive to be installed. Figure 13. Installing the retainer 20 User Guide