Lenovo NetVista Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N
Lenovo NetVista Manual
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo NetVista manual content summary:
- Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 1
Hardware Maintenance Service for Service Level A For Micro Tower Models Machine Type 2193, 2194 and 6345 For Desktop Models Machine Type 2196, 2197 and 6344 1 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 2
OR FITNESS FOR A PARTICULAR PURPOSE. References to IBM products, programs, or services do not imply that IBM intends to make them available outside the United States. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 3
, Messages, Error Codes, or Beeps 57 Troubleshooting ...67 Factory-Installed Storage Devices ...68 Factory-Installed Modem Card...70 Audio (Not Supported by Diagnostics Program 71 CD-ROM Drive ...73 Memory ...74 Keyboard...75 Mouse ...76 Power Supply...77 Monitor ...79 Undetermined Problems ...80 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 4
Types 2194 and 6345 122 Power Supply Cable Connector Specifications ...127 Main Output Pin Assignment...128 Factory-Installed Modem Card Layout ...130 Factory-Installed Modem Card Connector Functions 130 3.5-In. Hard Disk Drive Jumper Locations & Settings 131 CD-ROM Drive ...132 CD-ROM Emergency - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 5
legally protectable rights, may be used instead of the IBM product, program, or service. References in this publication to IBM products, programs, or services are purely hardwarerelated and do not cover circumstances of software problems. Evaluation and verification of operation in conjunction with - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 6
of this product during an electrical storm. To avoid shock hazard: The power cord must be connected to a properly wired and grounded receptacle. Any equipment also be connected to properly wired receptacles. When possible, use one hand to connect or disconnect signal cables to prevent a possible - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 7
hazardous radiation exposure. Removing the covers of the CD-ROM drive could result in exposure to hazardous laser radiation. There are no serviceable parts inside the CD-ROM drive. Do not remove the CD-ROM drive covers. DANGER Some CD-ROM drives contain an embedded Class 3A or Class 3B laser diode - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 8
PERIGO Para evitar choques elétricos, não conecte ou desconecte nenhum cabo, nem efetue instalação, manutenção ou reconfiguração deste produto durante uma tempestade com raios. Para evitar choques elétricos: O cabo de alimentação deve ser conectado a um receptáculo corretamente instalado e - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 9
cuidado: Ao substituir a bateria, utilize apenas o Número de Peça IBM 33F8354 ou um tipo de bateria equivalente recomendado pelo fabricante. Se seu sistema possuir um módulo com uma bateria de lítio, substitua-o apenas pelo mesmo - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 10
telecomunicação, redes e modems antes de abrir as tampas, a menos que receba outras instruções nos procedimentos de instalação e configuração. 10 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 11
11 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 12
12 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 13
13 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 14
14 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 15
15 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 16
, lorsque vous installez ou que vous déplacez le présent produit ou des périphériques qui lui sont raccordés, reportez-vous aux instructions ci-dessous pour connecter et déconnecter les différents cordons. Connexion Déconnexion 1. Mettez les unités hors tension. 2. Commencez par brancher tous les - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 17
attention: Remplacez la pile usagée par une pile de référence identique exclusivement - voir la référence IBM - ou par une pile équivalente recommandée par le fabricant. Si votre système est doté d'un module contenant une pile au lithium, vous devez le - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 18
hors tension et déconnectez ses cordons d'alimentation, ainsi que les câbles qui le relient aux réseaux, aux systèmes de télécommunication et aux modems (sauf instruction contraire mentionnée dans les procédures d'installation et de configuration). 18 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 19
VORSICHT Aus Sicherheitsgründen bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, Wartungs- oder Rekonfigurationsarbeiten durchführen. Aus Sicherheitsgründen: Gerät nur an eine Schutzkontaktsteckdose mit ordnungsgemäß geerdetem Schutzkontakt anschließen. - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 20
achtung: Eine verbrauchte Batterie nur durch eine Batterie mit der IBM Teilenummer 33F8354 oder durch eine vom Hersteller empfohlene Batterie ersetzen. Wenn Ihr System ein Modul mit einer Lithium-Batterie enthält, ersetzen Sie es immer - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 21
VORSICHT Manche CD-ROM-Laufwerke enthalten eine eingebaute Laserdiode der Klasse 3A oder 3B. Die nachfolgend aufgeführten Punkte beachten. Laserstrahlung bei geöffneter Tür. Niemals direkt in den Laserstrahl sehen, nicht direkt mit optischen Instrumenten betrachten und den Strahlungsbereich meiden. - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 22
PERICOLO Per evitare il pericolo di scosse elettriche durante i temporali, non collegare o scollegare cavi, non effettuare l'installazione, la manutenzione o la riconfigurazione di questo prodotto. Per evitare il pericolo di scosse elettriche: collegare il cavo di alimentazione ad una presa - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 23
Quando si sostituisce la batteria, utilizzare solo una batteria IBM o batterie dello stesso tipo o di tipo equivalente utilizzo di controlli, regolazioni o l'esecuzione di procedure non descritti nel presente manuale possono provocare l'esposizione a radiazioni pericolose. L'apertura di un'unità CD - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 24
PERICOLO Alcune unità CD-ROM contengono all'interno un diodo laser di Classe 3A o Classe 3B. Prestare attenzione a quanto segue: Aprendo l'unità vengono emesse radiazioni laser. Non fissare il fascio, non guardarlo direttamente con strumenti ottici ed evitare l'esposizione diretta al fascio. ≥32 Kg - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 25
25 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 26
26 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 27
27 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 28
PELIGRO Para evitar una posible descarga eléctrica, no conecte ni desconecte los cables ni lleve a cabo ninguna operación de instalación, de mantenimiento o de reconfiguración de este producto durante una tormenta eléctrica. Para evitar una posible descarga: El cable de alimentación debe conectarse - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 29
caution: Al cambiar la batería, utilice únicamente la batería IBM Número de pieza 33F8354 o un tipo de batería equivalente recomendado por el fabricante. Si el sistema tiene un módulo que contiene una batería de litio, - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 30
PELIGRO Algunas unidades de CD-ROM tienen incorporado un diodo de láser de Clase 3A o de Clase 3B Tenga en cuenta la siguiente información. Cuando la unidad está abierta se generan emisiones de rayos láser. No dirija la mirada al haz, no lo observe directamente con instrumentos ópticos y evite la - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 31
/DVD-ROM drive in the computer is a laser product. The CD/DVD-ROM drive's classification label (sample shown below) is located on the drive CLASS 1 and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. In other countries, the drive is certified to - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 32
IBM OS/2 Personal System/2 PS/1 PS/2 Intel, Pentium, MMX, EtherExpress, and LANDesk are trademarks or registered trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and Windows NT are trademarks or registered trademarks of Microsoft Corporation. Other company, product, and service - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 33
chapters: Notices contains important safety information and notices required to service this computer. General Information contains a brief description of this manual. Check Procedures provide step-by-step instructions that aid in locating the failure Field Replaceable Unit (FRU). Diagnostic - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 34
34 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 35
...37 Hardware Interfaces...40 CMOS Reset...41 Flash (BIOS) Update Procedure ...42 BIOS-contained Model Number and Serial Number 43 BIOS Setup Utility ...44 Working with the Setup Menus ...44 Start Options ...46 Advanced Setup...47 Power Management Setup...49 Set Password...49 Specifications...50 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 36
, 2194, 2196, 2197, 6344 and 6345, describes the standard and optional features, and details functional and environmental specifications. Machine Types 2196, 2197 and 6344 are desktop models and 2193, 2194 and 6345 are micro tower models. 36 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 37
board support the install an upgrade processor. • Detachable CPU heat sink with fan. • One of the memory is 512MB. External Ports • Video port (15-pin D-sub connector) • Parallel port (25-pin D-sub connector) • Serial port (9-pin D-sub connector) • Game/MIDI port (15-pin D-sub connector) • Keyboard - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 38
if: • Windows 98 Power Utility Timer elapses • System sleep timer elapses Power Supply • 95-watt switchable high/low voltage power supply. • Standard SFX power supply with +5V and +3.3V standby power Internal Cabling • 40-pin ribbon cable for CD-ROM and ATA-66 cable for hard disk drive. • One 34-pin - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 39
-in (RJ-11) connector. IBM Monitor • Super video graphics array (SVGA) monitor. • Compliant to VESA power saving mode. • Connector for a detachable grounded 3-wire power cord. • 1.8-m (5.8-ft) attached signal cable. • Auto-sensing power input for 100 V ac to 240 V ac. Keyboard • PS/2 104-key rubber - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 40
system unit. Table 1-1 System Board Hardware Interfaces Item Interface Expansion slot for I/O adapter cards Hard Disk Drives CD/DVD-ROM Drive Diskette Drive Video Modem Audio Pointing device Keyboard device Serial port Parallel port Game port Ethernet Port USB Three PCI (peripheral component - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 41
CMOS Reset This system does not deny access to the BIOS Setup Utility. Execute "Load BIOS Default Settings" in BIOS Setup to clear the corrupted CMOS data. See "Load Default Settings" on page 45. 41 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 42
a BIOS source code binary file. 2. Insert the diskette and boot from drive A. WARNING: Do not boot with any memory related driver such update the system bios. 6. The program updates the BIOS automatically. 7. Wait for the update to complete. WARNING: Do not turn off the system power while the BIOS - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 43
model number and serial number in the new BIOS ROM. To enter the model number and serial number into BIOS: 1. Prepare a bootable DOS diskette with VPD.EXE files. 2. Insert the diskette and boot from drive A. WARNING: Do not boot with any memory related driver such as HIMEM.SYS, EMS.SYS 3. At the - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 44
hardware. Working with the Setup Menus Starting the Setup Utility Follow these steps to enter Setup when the computer is off: 1. Turn on your monitor. 2. Turn on the system unit. 3. When you see the IBM logo, press F1 to enter Setup and display the Main Menu. Refer to the Setup Utility Main - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 45
on the keyboard that will help 's setting. In some menus, you can use these keys to move from one field to another. Press this key if you want help for a selected purchase an IBM personal computer, it is already configured for use. The original configuration settings, also called factory or default - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 46
of the hard disk drive for any attempt at modification. If any attempt is made, the BIOS will halt the system and an error message will appear. Afterwards, if necessary, you will be able to run an anti-virus program to locate and remove the problem before any damage is done. Quick Power On Self - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 47
the system contains no floppy drive for compatibility with Windows 95 logo certification. Also select Disabled for the Onboard FDC Control Field in the Devices and I/O Ports menu. Halt on Determines under what conditions the power-on self test (POST) will halt when errors are detected. Date and Time - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 48
Select enabled to use a USB keyboard. The USB Controller must also be set to enabled. IDE Drives Setup PIO (Programmed Input/Output) IDE device driver controllers can support up to two separate drives. These drives have a master/slave relationship which is determined by the cabling configuration - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 49
your system to most effectively save energy while operating in a manner consistent with your own style of computer use. APM Video Off Option Determines the video off function for power managerment. Video off Method Determines the manner in which the Monitor is blanked. Activity Monitor MODEM Use IRQ - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 50
Specifications Dimensions (width x depth x height): • System unit: • For Machine types 2193, 2194 (14° to 140°F) • Humidity for system unit: − Power on: 8% to 80% − Power off: 8% to 80% • Altitude for system unit: − 7,000 feet Power consumption: • System unit: − Maximum: 95-watts Electrical input: - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 51
Operating Requirements All machines require two power inputs: one on the system unit and one on the monitor display. The system unit comes with a voltage selector switch, allowing selection of either 115 V ac or 230 V ac. This switch must be - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 52
Special Tools The following special tool is required to service this system when running the diagnostics program (PC-Doctor): • Wrap plug, P/N 72X854 52 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 53
, Messages, Error Codes, or Beeps 57 Troubleshooting ...67 Factory-Installed Storage Devices ...68 Factory-Installed Modem Card...70 Audio (Not Supported by Diagnostics Program 71 CD-ROM Drive ...73 Memory ...74 Keyboard...75 Mouse ...76 Power Supply...77 Monitor ...79 Undetermined Problems ...80 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 54
(FRUs) most likely to cause a particular problem. Check Procedures: When the Start check procedure or the Index of Symptoms, Messages, Error Codes, or Beeps tables point you to a specific check procedure, proceed to that section. If there are any notes or instructions at the top of the page, read - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 55
keyboard, mouse, and monitor. Power off the system unit before moving it or when replacing FRUs. Remove all adapter cards, except for the factory-installed modem adapter card and any other IBM factory-installed adapter cards. Disconnect any drives except: • 3.5-in. diskette drive • Hard disk drive - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 56
"Power Supply Cable Connector Specifications" on page 127 and Parts/Test Point Locations on page 111 for layout of system board according to machine type Run the Diagnostics \ All Tests again. If an error or other symptom is displayed, go to "Index of Symptoms, Messages, Error Codes, or Beeps" on - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 57
the system board. Also check the power supply voltages if you have a "system no-power" condition. (Please refer to Parts/Test Point Locations on page 111.) If the problem cannot be corrected by using the "BIOS Error Codes, Messages, And Beeps List" table and "Error Symptoms List" table, go to - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 58
find the BIOS error messages, codes, or beeps in left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause. 201 Memory test failure. 301 Keyboard error or - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 59
1783 Secondary slave hard disk failure 8602 Mouse error on no Mouse present Check IDE drive jumper. See "3.5-In. Hard Disk Drive Jumper Locations" on page 131. IDE drive power. IDE drive cable/connection. IDE drive. Make sure the Mouse is connected properly and is set correctly in BIOS Setup. Mouse - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 60
the problem cannot be isolated. ERROR ENCOUNTERED INITIALIZING HARD DRIVE Hard drive cannot be initialized. Be sure the adapter is installed correctly and all cables are correctly and firmly attached. Also be sure the correct hard drive type is selected in Setup. ERROR INITIALIZING HARD DISK - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 61
is the most likely cause. Beeps (2: long, 1: short) 2-1-1 This code indicates that a video error has occurred and the BIOS cannot initialize the video screen to display any additional information. 2- (repeatedly) The code indicates that DRAM error has occurred. See "Memory (DIMM)" on page 98 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 62
mode when In Win98, check settings in Control Panel Power utility. the "Power Reload software from Recovery CD. Management" is set to [Enabled], and power saving timer set in BIOS has elapsed. System hangs "Index of Symptoms, Messages, Error Codes, or Beeps" on before system boot. page 57 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 63
in BIOS Setup, cable/jumper are set correctly before diagnosing any hard disk drive problems. Hard disk drive test Load default settings. failed. Hard disk drive cable. Hard disk drive. System board. Hard disk drive format error. Load default settings. Hard disk drive cable. Hard disk drive - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 64
drive is configured correctly in BIOS Setup, cable/jumper are set correctly and its laser beam is clean before diagnosing any CD-ROM drive problems. CD-ROM drive are no error codes or messages Make sure that the CD-ROM driver is installed properly. are displayed. CD-ROM drive. CD-ROM drive can - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 65
test is set in BIOS Setup. failed. Loop-back. System board. Printing failed. Make sure that the printer driver is properly installed. Refer to the service manual for the printer. Printer. Printer cable. System board. Printer problems. Refer to the service manual for the printer. Joystick - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 66
Symptoms Action/FRU NOTE: To diagnose a problem, first find the error symptom in the left column. If directed Memory module. System board. Missing diagnostics Diagnostics diskette. files(s). Keyboard Some or all keys on "Keyboard" on page 75. keyboard do not work. Power Supply Pressing power - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 67
Troubleshooting Failing Parts or Assemblies: The check procedures generally help you trace a problem to one part or assembly. and are not repaired in the field. Measuring Voltages: Some check procedure steps instruct you to measure voltages on cable plugs and electronic board connectors. If you are - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 68
the CD-ROM drive, make sure that the BIOS Setup Utility has the startup sequence set with diskette, CD-ROM, and hard disk drives. 001 - START Insert the diagnostics diskette into the diskette drive. Power-off then power-on the system unit. 002 - DO ANY POST MESSAGES, ERROR CODES, BEEPS, OR SYMPTOMS - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 69
drive. If the diagnostics program did not detect a failure, but the system still displays a failure: If an error or other symptom appears, go to "Index of Symptoms, Messages, Error Codes, or Beeps" on page 57. If no error can be detected or the symptom is intermittent, go to "Undetermined Problems - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 70
- DOES THE MODEM PASS THE TEST? (YES, READ AHEAD. NO, GO TO STEP 004.) Power off the system unit. Remove all adapter cards. Connect a hard disk drive with pre-loaded Windows 98. Power on the system unit. Perform the following steps under Windows 98. NOTE: If an operating system other than Microsoft - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 71
the system unit. Remove all adapter cards. Connect a hard disk drive with pre-loaded Windows 98. Power on the system unit. Load default settings in setup (audio may be disabled). 002 - DO ANY POST MESSAGES, ERROR CODES, BEEPS, OR SYMPTOMS APPEAR? (YES, READ AHEAD. NO, GO TO STEP 003) Go to "Index - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 72
008 Make sure that the volume control is not turned low. Make sure that the speaker and its adapter are not damaged. Make sure that the speaker is plugged into speak-out jack. Refer to Parts/Test Point Locations on page 111 If the error cannot be resolved, replace the system board. End. 72 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 73
CD-ROM Test. 002 - DO YOU SEE A MESSAGE "NO CD-ROM DRIVE OR MSCDEX DEVICE DRIVER INSTALLED." ? (YES, READ AHEAD. NO, GO TO 003.) Exit the diagnostics program and power off the system. Check and make sure that the CD-ROM drive power cable and audio and data cables are not damaged and are connected - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 74
, GO TO STEP 003) Enter BIOS Setup Utility then reboot the system. Take note of any messages, error codes, or symptoms. If the error message remains, go to step 005. 003 Follow the screen instructions to run the Memory test. 004 - DOES THE MEMORY TEST COMPLETE WITHOUT AN ERROR? (YES, READ AHEAD. NO - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 75
. NO, GO TO STEP 005.) Power off the system unit. Carefully remove the grime and solve the stuck keys problem. Go to step 001. 005 - ARE THERE ANY BROKEN PINS IN THE KEYBOARD PLUG? (YES, GO TO STEP 007. NO, READ AHEAD.) Try with a known good keyboard. 006 - DOES THE ERROR SYMPTOM STILL REMAIN? (YES - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 76
. If you suspect this, go to "Keyboard" on page 75. 001 - START Make sure that the mouse ball turns freely. Make sure that the mouse plug connects properly. 002 Power off the system unit. Insert the diagnostics diskette into the diskette drive. Power on the system unit. Select Interactive Tests - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 77
the power supply fan running, check the voltages of the power supply connectors for the system board and all drive connectors, as shown in the following figures. 11 20 1 10 Power Supply Connectors (Bottom View) Hard Drive or CD-ROM End of Power Cable 3.5-In. Diskette Drive End of Power Cable - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 78
, GO TO STEP 009) The power supply is working normally. If you suspect the on/off switch cable assembly, see Step 003. If the fan continues to run when all connectors are plugged back in, go to "Undetermined Problems" on page 80. If the fan stops running when a drive connector is plugged back in - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 79
. NO, GO TO STEP 004) You have successfully completed the video diagnostics tests. If the problem remains, go to "Index of Symptoms, Messages, Error Codes, or Beeps" on page 57. End. 004 Power off the system unit. Remove the hard disk drive system cable. Power on the system unit. 005 - IS THE SCREEN - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 80
Diskette drive Hard disk drive DIMM Processor System board 4. Power on the system unit. 5. Repeat steps 1 through 4 until you find the failed device or adapter. 6. If software related, reload software from Recovery CD. If the symptom changes, go to "Index of Symptoms, Messages, Error Codes, or Beeps - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 81
Diagnostic Aids Diagnostic Aids ...81 Introduction ...82 Power-On Self Test...83 Diagnostics Tools...84 Using Diagnostics Program from Recovery CD 84 Diagnostics Program Features...84 Copyright IBM Corp. 2000 81 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 82
Introduction This section explains the diagnostic aids, power-on self test (POST) and diagnostics program (PC-Doctor), that are available for troubleshooting problems on the system. 82 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 83
diskette drive A or a hard disk drive or CD-ROM drive, depending on the options selected in the Setup Utility. If any errors are detected by POST, there will be an error message accompanied with an error code shown on display screen and a beep. See "Index of Symptoms, Messages, Error Codes, or Beeps - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 84
Recovery CD 1. Insert the recovery CD into the CD-ROM drive then restart computer. 2. Press F1 during POST to enter BIOS Setup menu. Select and enter "BIOS Features Selections • System Test • Memory Test • Hard Disk Test • Floppy Disk Test • All Tests • Keyboard • Video • Internal Speaker • Mouse - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 85
Onboard Ethernet • USB Port • System Configuration • Memory Contents • IRQ and DMA Use • Device Drivers • COM and LPT Ports • Physical Disk Drives • Logical Disk Drives • VGA Information • Software Interrupts • SCSI Devices • I/O Use • IDE Drive Info • Network Information • PCMCIA Information • PCI - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 86
86 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 87
and Replacements of machine type 2196, 2197, and 6344 99 Identifying the Parts of the System Unit ...100 Top Cover ...102 Adapter Cards...103 Diskette Drive...104 CD-ROM Drive ...105 Hard Disk Drive...106 System Board ...107 Power Supply...108 Memory (DIMM) ...109 Copyright IBM Corp. 2000 87 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 88
2193, 2194, and 6345 BEFORE REMOVING ANY FRU, POWER-OFF THE COMPUTER, UNPLUG ALL POWER CORDS FROM ELECTRICAL OUTLETS, THEN DISCONNECT ANY INTERCONNECTING CABLES. ATTENTION: The System board, processors, adapter cards, DIMMs, and upgrade processors can be damaged by electrostatic discharge. Use an - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 89
Identifying the Parts of the System Unit This computer system has 4 bays, each bay has a factory-installed drive in it. The devices are 3.5" Diskette, 40X CD-ROM drive (For 6345 system only some models have) and 5.0 GB hard disk (some models may have hard disk of 10 or 15 GB capacity). Diskette - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 90
1.Power Supply This is a 95-watt switching power supply. 2.CD-ROM Drive This machine has a factory-installed 40 X CDROM drive. 3.Bay 2 This drive can accommodate a 5.25-inch device. 4.Hard Disk Drive This machine has a factory-installed 3.5" (10 or 15) GB hard disk drive. 5.Diskette Drive This - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 91
the components inside the frame before you touch the frame. Do not touch any of the components that have a voltagewarning label. Disconnect the system unit power cord. 91 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 92
Adapter Cards Installing Adapter Cards Remove the screw that secures the adapter card retainer and slot cover. Then remove the card retainer and slot cover. Align and insert the adapter card into the adapter card connector. Secure the card with the screw that you removed in the first step. Reinstall - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 93
the diskette drive: Disconnect the power and signal cables from the back of the diskette drive. Remove the diskette mounting tray from the chassis as following illustration : Pivot the latch that secures the lower drive-mounting tray. Slide the drive-mounting tray toward the rear of the computer and - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 94
CD-ROM Drive To remove CD-ROM Drive: Disconnect the power, sound and signal cables from the CD-ROM. Remove the four screws (two on each side) that hold the CD-ROM drive to the chassis. Open the door on the front of the computer. Slide the CD-ROM drive forward through the front opening and remove - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 95
Hard Disk Drive To remove or replace the hard disk drive: Make sure to disconnect the power and signal cables from the CD-ROM drive and the diskette drive. Pivot the latch that secures the lower drive-mounting tray. Slide the drive-mounting tray toward the rear of the computer and remove it. Note: - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 96
from the system: To remove the system board, you must remove the adapter cards first. Disconnect the power cable, CD-ROM cable, Diskette Drive cable, Hard Disk Drive cable, audio cable, power switch cable, speaker cable and LED cable from system board. Remove the eight screws on system board. Note - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 97
Power Supply This system has a 95-watt switching power supply. To remove the power supply, you must remove the top cover first. Disconnect the power cable from the riser board and all drives. Remove the screws in the machine rear that secure the power supply. 97 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 98
Memory (DIMM) This system has 2 system memory module sockets, DIMM 0 and DIMM 1. These sockets hold dual in line memory modules (DIMM) that contains 3.3V single or double-sided synchronous DRAM (SDRAM). The maximum memory size is 512MB total. 98 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 99
2196, 2197, and 6344 Before Removing any FRU, Power-OFF The COMPUTER UNPLUG, ALL POWER CORDS FROM ELECTRICAL OUTLETS, THEN DISCONNECT ANY INTERCONNECTING CABLES. ATTENTION: The System board, processors, adapter cards, DIMMs, and upgrade processors can be damaged by electrostatic discharge. Use an - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 100
the Parts of the System Unit This computer system has 3 bays, each bay has a factory-installed drive in it. The devices are 3.5" Diskette, 40X CD-ROM drive and 5.0 GB hard disk (some models may have hard disk of 10 or 15 GB capacity). Diskette drives in this unit use the standard diskette - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 101
-watt switching power supply. 2. Expansion slots On the rear panel of the system unit are 3 slot openings for installation of adapter card. 3. Modem card This system may include a V.90 Data/Fax modem. For 6344 systems will use the Ethernet card. 4. Diskette Drive This machine has a factory-installed - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 102
the components inside the frame before you touch the frame. Do not touch any of the components that have a voltagewarning label. Disconnect the system unit power cord. 102 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 103
Adapter Cards Installing Adapter Cards Remove the screw that secures the adapter card retainer and slot cover. Then remove the card retainer and slot cover. Align and insert the adapter card into the adapter card connector. Secure the card with the screw that you removed in the first step. Reinstall - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 104
To remove the diskette drive: Disconnect the power and signal cables from the back of the diskette drive. Pull up the latch that secures the drive-mounting tray. Slide the drive-mounting tray toward the front of the computer and remove it Remove the four screws (two on each side) that secure the - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 105
To remove CD-ROM Drive: Disconnect the power, sound and signal cables from the CD-ROM. Pull up the latch that secures the CD-ROM drive-mounting tray. Slide the drive-mounting tray toward the back of the computer and remove it. Remove four screws (two on each side) that secure the bay holder. Pull - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 106
the above steps to remove the CD-ROM. Make sure to disconnect the power cord and signal cables from the hard disk drive and the diskette device. Remove the screws that secure the bay holder that holds the hard diskette drive. Pull the bay holder right to uncouple it from the chassis completely and - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 107
from the system: To remove the system board, you must remove the adapter cards first. Disconnect the power cable, CD-ROM cable, Diskette Drive cable, Hard Disk Drive cable, audio cable, power switch cable, speaker cable and LED cable from system board. Remove the eight screws on system board. 107 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 108
Power Supply This system has a 95-watt switching power supply. To remove the power supply, you must remove the top cover first. Disconnect the power cable from the riser board and all drives. Remove the screws in the machine rear that secure the power supply. 108 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 109
Memory (DIMM) This system has 2 system memory module sockets, DIMM 0 and DIMM 1. These sockets hold dual in line memory modules (DIMM) that contains 3.3V single or double-sided synchronous DRAM (SDRAM). The maximum memory size is 512MB total. 109 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 110
110 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 111
Power Supply Cable Connector Specifications ...127 Main Output Pin Assignment...128 Factory-Installed Modem Card Layout ...130 Factory-Installed Modem Card Connector Functions 130 3.5-In. Hard Disk Drive Jumper Locations & Settings 131 CD-ROM Drive Keyboard Port Signals ...136 Diskette Drive Cable - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 112
this information to help you locate parts such as electronic boards, connectors, pin numbers, and test points. This chapter also contains jumper settings for the hard disk drive, CD-ROM (compact disc-read-only memory) drive, and the connector information for modem adapter card. 112 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 113
Layout of System Board of Machine Types 2194 (Italy), 2197 and 6344 (EMEA/AP) Jumpers and Connectors Locations of System Board of Machine Types 2194 (Italy), 2197 and 6344 (EMEA/AP) 113 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 114
1-2 1-2 1-2 1-2 CPU Clock Frequency Ratio 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 JP6 CMOS data clear-up Jumper connected 2-3 1-2 J8 Jumper connected to Front Panel 1-2 3-4 J9 Jumper connected to power switch 1-2 Function Normal Clear Indication Power LED Hard Disk Drive LED Power Button 114 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 115
Switch connector Hard Disk connector (Primary IDE) CD-ROM Drive connector (Secondary IDE) CD Audio connector CD IN connector Passive speaker connector COM 1 connector SYSTEM FAN ATX Power connector Front USB, Audio In, Audio Out and Volume control PS/2 Keyboard and Mouse connector Flash ROM BIOS VGA - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 116
Layout of System Board of Machine Type 6344 (US/Canada/LA) Jumpers and Connectors Locations of System Board of Machine Type 6344 (US/Canada/LA) Jumper Settings of the System Board of Machine Type 6344 (US/Canada/LA). The Jumper Ratio is determining by BIOS. 116 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 117
FAN PCI Slot 1 PCI Slot 2 PCI Slot 3 Clear CMOS HDD LED, Power LED, Speaker, Power Switch and Reset Swith Primary IDE Secondary IDE ATX Power Connector Serial Port Connector Serial Port Connector Parallel Port Connector VGA Connector Keyboard / Mouse connector Wake Up on LAN Connector Modem Wake Up - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 118
Layout of System Board of Machine Types 2193 and 2196 Jumpers and Connectors Locations of System Board of Machine Types 2193 and 2196 118 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 119
to Front Panel 1-2 3-4 J15 Jumper connected to power switch 1-2 CPUCLK 66 100 95 100 66 97 SDRAMCLK 100 133 95 100 66 129 CPU Clock Frequency Ratio 6.0 5.5 5.0 4.5 4.0 3.0 Function Normal Clear Indication Power LED Hard Disk Drive LED Power Button JP5 Vcore Voltage 1-2 3-4 5-6 CPU Voltage - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 120
Power connector CPU FAN Connector Hard Disk connector (Primary IDE) CD-ROM Drive Power Switch Printer, COM 1 and VGA connector PS/2 Key Board and Mouse connector Power and HDD LED connector CD Audio in connector Game port, Audio In, Audio Out and MIC connector Passive speaker connector Flash ROM BIOS - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 121
JP5 SDRAM JP16 JP15 FWH32 ICH/ 82801 JP24 JP13 JP12 J19 J12 BAT DIMM 1 J9 JP10 DIMM 2 IDE 2 IDE 1 GMCH 82810 810E ATX PWR 6WMMC7-1 POWER Floppy FAN JP1 Jumpers and Connectors Locations of System Board of Machine Types 2194 and 6345 121 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 122
& Audio USB port. For Primary IDE port. For Secondary IDE port. For PS/2 Mouse & Keyboard port. For Floppy port. For Serial port1 (COM A){Support Modem Ring On}. For LPT port. For VGA Port. For ATX Power Connector. For Game & MIC LINE-IN, LINE-OUT, TEL Port ,CD-IN, AUX-IN, SPDIF OUT (Optional - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 123
PWR ON :Internal Modem Card Ring PWR On Pin No. Function 1 Signal 2 GND JP2: Keyboard Power On Selection Pin No. Function 1-2 close Enabled Keyboard Power On. 2-3 close Disabled Keyboard Power On (Default). JP12: Clear CMOS Pin No. Function 1-2 close Clear CMOS 2-3 close Normal - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 124
Open STR Disable (Default) JP14: Case Open Pin No. Function 1 Signal 2 GND JP13: Safe Mode/Recovery/Normal Pin No. Function 1-2 close Normal (Default) 2-3 close Safe Mode 1-2-3open Recovery JP16: Top Block Lock Pin No. Function Open Top Block Lock Close Top Block Unlock - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 125
Pin No. Function Open Normal (Default) Close Write Protection. J12: For 2X11 Pins Jumper GD J12 1 PWR P+P−P− HD GN 1 1 1 RES SPKR Soft PWR: Soft Power Connector RES: Reset Switch Open: Normal Operation Short: Power On/Off Open: Normal Operation Short: For Hardware Reset System 125 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 126
P+P−P−: Power LED 1 SPKR: Speaker Connector PIN 1: LED anode (+) PIN 2: LED cathode (−) PIN 3: LED cathode (−) 1+ − PIN 1: VCC (+) PIN 2: NC PIN 3: NC PIN 4: Data (−) HD: IDE Hard Disk Active LED 1 PIN 1: LED anode (+) PIN 2: LED cathode (−) GN: Green Function Switch Open: Normal - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 127
figures when checking for voltages on power supply cable connectors. When checking voltages, the power supply fan must be running. To power on the power supply without using the on/off switch, use a screwdriver or other tools to short the power supply connector (with the switch cable disconnected - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 128
Main Output Pin Assignment Table 4-7 Main Output Pin Assignment Pin Function 1 +3.3 V 2 3.3 V 3 COMMON 4 +5Vdc 5 COMMON 6 +5Vdc 7 COMMON 8 POWER GOOD 9 +5Vs 10 +12Vdc 11 3.3V 12 -12Vdc 13 COMMON 14 P.S-on 15 COMMON 16 COMMON 17 COMMON 18 NC 19 +5Vdc 20 +5Vdc Color - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 129
Hard Drive or CD-ROM Power Cable Connector 3.5-In. Diskette Drive Power Cable Connector 129 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 130
-Installed Modem Card Layout 1 2 Factory-Installed Modem Card Layout Factory-Installed Modem Card Connector Functions Item Function Connect to... 1 Telephone line -out Telephone set Some modem adapters may come without this jack. 2 Telephone line-in - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 131
3.5-In. Hard Disk Drive Jumper Locations & Settings 3.5-In. Hard Disk (Maxtor) Jumper Settings Locations Back of Drive (Quantum) AT Interface connector DS CS PK Master CS GND Default Setting Jumper Configurations Slave Cable Select CS DS DS GND GND GND Jumper Shown - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 132
Drive CD-ROM Front Panel NOTE: Position of CD-ROM switches and LEDs may vary from illustration. Item 1 2 3 4 5 Description Load / eject button Headphone jack Power insert and press an eject-bar inside the emergency eject hole to manually eject the tray. A straightened paper clip with a diameter of - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 133
2 CD-ROM Rear Panel Item 1 2 3 Function Power supply connector Configuration jumper. See Table 5-9. NOT USED 1 Connect to... Power supply --- CD-ROM Drive Jumper Settings CS SL MA DESCRIPTION -- -- On Drive configured as a Master. (default) -- On -- Drive configured as a Slave. On - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 134
DIMM Configurations The system board has two DIMM sockets. A maximum of 512MB memory may be installed. You can install 16MB, 32MB, 64MB, 128MB, or 256MB DIMMs in any sockets and with any combinations. 134 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 135
Signal Name I/O 1 Red Video O9 +5 V dc N/A 2 Green Video O 10 Synch Ground N/A 3 Blue Video O 11 No Connection Name Auto Feed Error Initialize Select (In) Ground Ground Ground Ground Ground Ground Ground Ground I/O N/A I O O Power Power Power Power Power Power Power Power Mouse Port - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 136
Keyboard Port Signals Pin Signal Name 1 Keyboard Data 2 Mouse Data 3 Ground I/O Pin Signal Name I/O 4 +5 V dc N/A 5 Keyboard Clock Power 6 Mouse Clock I/O Power I/O N/A 136 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 137
Write GATE O 8 Index I 25 Ground N/A 9 Ground N/A 26 Track 0 I 10 No Connection N/A 27 Ground N/A 11 Ground N/A 28 Write Protect I 12 Drive Select 1 O 29 Ground N/A 13 Ground N/A 30 Read Data I 14 No Connection N/A 31 Ground N/A 15 Ground N/A 32 SIDE 1 SELECT O 16 Motor - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 138
Ground Host IRQ No Connection Host A1 No Connection Host A0 Host A2 Host CS0 18 Host Data 15 19 Ground 20 No Connection I/O 38 Power 39 N/A 40 Host CS1 ACTIVE bar Ground I/O I Power O Power O Power I N/A O Power I N/A O N/A O O O O I Power 138 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 139
Safety Inspection Guide General Guidelines ...140 139 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 140
possible safety conditions not covered by this Safety Inspection Guide. If any unsafe conditions are present, you must find out how serious the hazard is and if you can continue before you correct the hazard. All current IBM service supplements outlining feature/model changes, along with the machine - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 141
Parts Catalog of machine type 2193, 2194, and 6345 142 Assembly 1: System Unit ...142 Assembly 2: Diskette Drive, Hard Disk Drive 145 Assembly 3: CD-ROM, Modem Card ...146 Assembly 4: Keyboard and Mouse ...148 Parts Catalog of machine type 2196, 2197, and 6344 152 Assembly 1: System Unit ...152 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 142
600MHz 66FSB 1-2 19K3387 INTEL PIII 600MHz 133FSB 1-2 19K3388 INTEL, PIII 667MHz 133FSB 1-3 19K3292 Fansink, Supports PIII and Celeron 600MHz and up (PIII base) Processors 1-3 19K3348 Fansink, Supports K6-2 and Celeron (non-PIII base) Processors 1-4 19K3356 32MB module (PC100) 142 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 143
(PC133) 95W Power Supply Power Cord US/CE/CF/Taiwan Power Cord LA-Lo Voltage Power Cord LA-Lo Voltage Power Cord Brazil Power Cord APU Countries Power Cord UK/HK/Singapore Power Cord Euro Power Cord Swiss Power Cord Denmark Power Cord Israel Power Cord South Africa Power Cord Italy Power Cord China - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 144
19K3359 36L9077 09N5409 01N3003 19K3312 19K3603 19K3317 19K3318 19K3366 09N5403 09N5411 Chassis (w/o power supply) w/USB (Chenming) Chassis (w/o power supply) w/o USB (Enlight) Chassis (w/o power supply) w USB (Enlight) 3.5" FDD/HDD (Holder) Bracket, Used w/Chenming Chassis 3.5" FDD/HDD (Holder - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 145
Assembly 2: Diskette Drive, Hard Disk Drive Asm-Index FRU Number Description 2-1 19K3298 5 GB Hard Disk Drive, 3.5" 2-1 10K2059 10 GB Hard Disk Drive, 3.5" 2-1 19K3299 15 GB Hard Disk Drive, 3.5" 2-1 19K3355 20 GB Hard Disk Drive, 3.5" 2-2 36L9130 3.5", Diskette Drive 2-3 19K3319 HDD - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 146
Assembly 3: CD-ROM, Modem Card 3-4 3-6 3-7 3-5 Asm-Index FRU Number Description 3-1 19K3360 40X CD-ROM, White 3-1 19k3300 48XCD-ROM, White 3-1 19K3301 32X CD-RW, White 3-1 19K3349 40X CD-ROM, Black Bezel 3-2 19K3358 CD-ROM IDE Cable 3-3 09N5406 CD-ROM Audio Cable (2194) 3-3 19K3337 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 147
3-7 01N1872 Modem Phone Cable Adapter Australia 3-7 01N1874 Modem Phone Cable Adapter NZ 3-7 60H6043 Modem Phone Cable Adapter Spain/Southern Ireland 3-7 60H6045 Modem Phone Cable Adapter Australia 3-7 60H6046 Modem Phone Cable Adapter Belgium 3-7 60H6047 Modem Phone Cable Adapter - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 148
Assembly 4: Keyboard and Mouse 4-2 4-1 4-3 Asm-Index FRU Number Description 4-1 10L6145 Mouse, Badger 4-1 28L1865 Mouse, Scrollpoint II 4-2 37L2590 104 US ENGLISH 103P 4-2 37L2591 105 FR CANADIAN 058 (Commercial) 4-2 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 149
4-2 37L2606 105 SWED/FINNISH 153 4-2 37L2607 105 SWISS 150 4-2 37L2608 105 UK ENGLISH 166 4-2 37L2609 104 US ENGLISH-EMEA 103P ANZ 4-2 37L2610 109 JAPANESE 194 4-2 37L2611 104 CHINESE/US 467 HK/TW 4-2 37L2612 105 BELGIUM FRENCH 120 4-2 37L2640 105 ICELANDIC 197 4-2 37L2514 104 PALM - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 150
, Blue Grill, PC99 10K2601 Infinity (Zylux), Active, Tier 1, Pearl White, PC99 10K2587 Speaker Power Adapter US/CE/LA/Taiwan 10K2591 10K2589 Speaker Power Adapter EURO and LA High Voltage Models Speaker Power Adapter GB/UK includes Scotland/England/Northern Ireland/Wales and HK 10K2595 Speaker - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 151
, Croatia, Egypt, Greece, Hungary, Poland, Portugal, Romania, Slovenia, Spain, Sweden, Turkey, LA (HI Volt), Danish, Swiss, Italy Jazz Speaker Power Adapter, TEAC-41-090400V 4-3 19K3638 Includes Scotland/England/Northern Island/Wales/GB/HK/Singapore/United Arab Emirate (Dubai) 4-3 19K3637 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 152
) INTEL Celeron 500MHz 66FSB INTEL Celeron 533MHz 66FSB INTEL Celeron 600MHz 66FSB INTEL, PIII 550MHz 100FSB INTEL, PIII 600MHz 133FSB INTEL, PIII 667MHz 133FSB Fansink, Supports K6-2 and Celeron Processors Fansink, Supports PIII Processors and Celeron 600 and up - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 153
128MB module (PC133) 1-5 19K3309 95W Power Supply (LP) 1-5 19K3585 95W Power Supply used w/MSI-6188 810E Planar 1-6 6952301 Power Cord US/CE/CF/Taiwan 1-6 6952301 Power Cord LA-Lo Voltage 1-6 36L8879 Power Cord APU Countries 1-6 14F0032 Power Cord, UK/HK/Singapore/United Arab - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 154
w/FDD/CD-ROM slots, White (for PC300) Outer (Bezel) Panel w/FDD slot, White FDD (Holder) Bracket HDD (Holder) Bracket CD-ROM (Holder) Bracket Chassis (wo/power supply) Port Bracket LP/PCI Planar I/O Port EMC Shield Planar I/O Port EMC Shield (includes label), Used w/MSI-6188 810E Planar - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 155
Drive, Hard Disk Drive Asm-Index FRU Number Description 2-1 19K3298 5GB Hard Disk Drive, 3.5" 2-1 10K2059 10 GB Hard Disk Drive, 3.5" 2-1 19K3299 15 GB Hard Disk Drive, 3.5" 2-1 19K3355 20 GB Hard Disk Drive, 3.5" 2-2 36L9130 3.5", Diskette Drive 2-3 19K3341 Hard Disk Drive Cable - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 156
Assembly 3: CD-ROM, Modem Card 3-4 3-6 3-7 3-5 Asm-Index FRU Number Description 3-1 19K3360 40X CD-ROM, White 3-1 19k3300 48XCD-ROM, White 3-1 19K3301 32X CD-RW, White 3-1 19K3413 32X CD-ROM, Black Bezel 3-1 19K3643 48X CD-ROM, Black Bezel 3-1 19K3349 40 X CD-ROM, Black Bezel 3-2 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 157
3-7 01N1874 Phone Cord Adapter NZ 157 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 158
Assembly 4: Keyboard and Mouse 4-2 4-3 4-1 Asm-Index FRU Number Description 4-1 10L6145 Mouse, Badger 4-1 28L1865 Mouse, Scrollpoint II 4-2 37L2609 104 US ENGLISH-EMEA 103P 4-2 37L2610 ANZ 109 JAPANESE 194 4-2 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 159
4-2 37L2528 104 PALM REST HEBREW 212 4-2 37L2529 105 PALM REST HUNGARIAN 208 4-2 37L2530 105 PALM REST ICELANDIC 197 4-2 37L2531 105 PALM REST, EURO ITALY 142 4-2 37L2532 105 PALM REST, EURO NORWEGIAN 155 4-2 37L2533 105 PALM REST POLISH 214 4-2 37L2534 105 PALM REST PORTUGUESE 163 4-2 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 160
online resources including several Internet World Wide Web sites, the IBM Online HelpCenter support areas, and a Fax-Back service. The IBM Automated Fax-Back System offers a variety of IBM computer-related articles. To access this service, call 800-IBM3395. The Fax-Back system file library can - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 161
32-bit Access, 40 Check Procedure, 68 Error Symptoms, 63 PIO Mode, 48 Hard Disk Drive, 40 I IDE Connector Signals, 138 J Joystick, 40, 84 Error Symptoms, 65 K Keyboard, 39 Check Procedure, 75 Error Symptoms, 66 Keyboard Port Port Signals, 136 M Memory, 37 Check Procedure, 74 DIMM Configurations, 134 - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 162
Adapter Cards, 103 CD-ROM Drive, 105 Diskette Drive, 106 Hard Disk Drive, 106 Memory (DIMM), 109 Power Supply, 108 System Board, 107 Top Cover, 102 S Safety Inspection Guide, 139 Serial Number, 43 Serial Port, 37, 40, 47 Error Symptoms, 65 Port Signals, 135 service level A (SL-A), 33 Specifications - Lenovo NetVista | Hardware Maintenance Manual (HMM) for Aptiva, IBM PC300, and N - Page 163
Printed in U.S.A. International Business MachinesCorporation Old Orchard Road, Armonk, New York 10504 Part Number: 19K2493 Pub Number: S19K-2493-00 3/00
1
Hardware Maintenance Service
for Service Level A
For Micro Tower Models
Machine Type 2193, 2194 and 6345
For Desktop Models
Machine Type 2196, 2197 and 6344