Lenovo NetVista Technical information manual for NetVista 6269, 6568, 6569, 65 - Page 35
System software, BIOS, Plug and Play, POST
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 5. System software This section briefly describes some of the system software included with the computer. BIOS The NetVista computer uses the IBM BIOS, which is stored in flash EEPROM). Some of the features of the BIOS are: • PCI support in accordance with PCI BIOS Specification 2.2 • Microsoft PCI IRQ Routing Table • Plug and Play support in accordance with Plug and Play Specification 1.1a • Wake on LAN support • Asset ID support (some models) • RPL and DHCP • Startable CD-ROM support • Alternate startup sequence support • IBM look and feel, such as screen arrangements • Advanced Configuration and Power Interface (ACPI) 1.0b • IDE logical block addressing (LBA) support • LS 120 support • Desktop Management (DM) BIOS 2.0 (DMI compliant) • PC99 compliance Plug and Play Support for Plug and Play conforms to the following: • Plug and Play BIOS Specification 1.0a • Plug and Play BIOS Extension Design Guide 1.0 • Plug and Play BIOS Specification, Errata, and Clarifications 1.0a • Guide to Integrating the Plug and Play BIOS Extensions with system BIOS 1.2 • Plug and Play kit for DOS and Windows POST IBM POST code is used. Also, initialization code is included for the on-board system devices and controllers. POST error codes include text messages for determining the cause of an error. For more information, see the NetVista User Guide or the NetVista Hardware Maintenance Manual. © Copyright IBM Corp. 2000 25