Lenovo PC 300PL Techical Information Manual - Page 17
Monitor support, Video memory, Audio subsystem, Product Recovery CD
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2. System board features Figure 3. Supported VGA video modes Mode (hex) 00 01 02 03 04 05 06 07 0D 0E 0F 10 11 12 13 Display mode Text Text Text Text Graphics Graphics Text Text Graphics Graphics Graphics Graphics Graphics Graphics Graphics Screen resolution 40 x 25 characters 40 x 25 characters 80 x 25 characters 80 x 25 characters 320 x 200 pixels 320 x 200 pixels 640 x 200 pixels 80 x 25 characters 320 x 200 pixels 640 x 200 pixels 640 x 350 pixels 640 x 350 pixels 640 x 480 pixels 640 x 480 pixels 320 x 200 pixels Colors 2 16 B/W 16 4 4 2 Mono 16 16 Mono 16 2 16 256 Buffer start (hex) B8000 B8000 B8000 B8000 B8000 B8000 B8000 B0000 A0000 A0000 A0000 A0000 A0000 A0000 A0000 Dot clock (MHz) 28.322 28.322 28.322 28.322 25.175 25.175 25.175 28.322 25.175 25.175 25.175 25.175 25.175 25.175 25.175 Sweep rate (kHz) 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 Refresh rate (Hz) 70 70 70 70 70 70 70 70 70 70 70 70 60 60 70 Monitor support The video subsystem provides a 15-pin monitor connector on the system board. For information on connector pin assignments, see Appendix A, "Connector pin assignments" on page 25. Video memory The video memory interface is controlled by an integrated graphics subsystem on the AGP adapter with up to 16 MB video RAM for 2D/3D graphics. Audio subsystem The PC 300PL Personal Computer comes with an integrated audio controller. These models are capable of playing and recording sounds and support SoundBlaster, Adlib, and Microsoft Windows Sound System applications. The device drivers for the preinstalled audio adapter are on the hard disk. The device drivers are also available on the Product Recovery CD or Device Driver and IBM Enhanced Diagnostics CD that comes with the computer. If you connect an optional device to the audio adapter, follow the instructions provided by the manufacturer. (Note that device drivers might be required. If necessary, contact the manufacturer for information on these device drivers.) The following connectors are available on the integrated audio controller: Line/headphone out port for connecting powered speakers. To hear audio from the adapter you must connect a set of speakers to the Line out port. These speakers must be powered with a built-in amplifier. In general, any powered speakers designed for use with personal computers can be used with the audio subsystem. These speakers are available with a wide range of features and power outputs. Line in port for connecting musical devices, such as a portable CD player or stereo system. Chapter 2. System board features 9