Lenovo ThinkCentre M91p Hardware Maintenance Manual - Page 54
Diagnostic Error Code, BIOS Configuration/Setup error - review
View all Lenovo ThinkCentre M91p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Diagnostic Error Code 000-000-XXX BIOS Test Passed 000-002-XXX BIOS Timeout 000-024-XXX BIOS Addressing test failure 000-025-XXX BIOS Checksum Value error 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded 000-197-XXX BIOS test warning FRU/Action No action 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 2. System board 1. Run the Setup Utility program. 2. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 3. System board 1. Reboot the system. 2. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 3. Run memory test 4. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 2. Adapter card 3. System board 1. Flash the system. See "Updating (flashing) the BIOS from a disc" on page 186. 2. System board Information only Restart the test, if necessary. 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 41. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 48 ThinkCentre Hardware Maintenance Manual