Home » Lenovo Manuals » Desktops » Lenovo ThinkCentre M91p » Manual Viewer

Lenovo ThinkCentre M91p Hardware Maintenance Manual - Page 63

Audio port Interface Test Passed

View all Lenovo ThinkCentre M91p manuals

Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Diagnostic Error Code 030-196-XXX SCSI interface test halt, error threshold exceeded 030-197-XXX SCSI interface test warning 030-198-XXX SCSI interface test aborted 030-199-XXX SCSI interface test failed, cause unknown 035-000-XXX RAID interface Test Passed 035-0XX-XXX RAID interface Failure 035-195-XXX RAID interface Test aborted by user 035-196-XXX RAID interface test halt, error threshold exceeded 035-197-XXX RAID interface test warning 035-198-XXX RAID interface test aborted 035-199-XXX RAID interface test failed, cause unknown 071-000-XXX Audio port Interface Test Passed FRU/Action 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 41. 2. Re-run the test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 41. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 186. 3. Go to "Undetermined problems" on page 66. 1. Go to "Undetermined problems" on page 66. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 186. 3. Replace component under function test. No action 1. RAID signal cable 2. RAID device 3. RAID adapter card, if installed 4. System board Information only Restart the test, if necessary. 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 41. 2. Re-run the test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 41. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 186. 3. Go to "Undetermined problems" on page 66. 1. See "Undetermined problems" on page 66. 2. Flash the system and re-test. See "Updating (flashing) the BIOS from a disc" on page 186. 3. Replace component under function test. No action Chapter 7. Symptom-to-FRU index 57

Section	Page
Chapter 1. About this manual	7
Important safety information	7
Important information about replacing RoHS compliant FRUs	7
Chapter 2. Safety information	9
General safety	9
Electrical safety	9
Voltage-selection switch	11
Safety inspection guide	11
Handling electrostatic discharge-sensitive devices	12
Grounding requirements	12
Safety notices (multi-lingual translations)	12
Chapter 3. General information	35
Lenovo Welcome	35
Lenovo ThinkVantage Tools	35
Lenovo ThinkVantage Toolbox	35
SimpleTap	35
Lenovo Solution Center	36
ThinkVantage Productivity Center	36
Additional information resources	36
Specifications	37
Chapter 4. General checkout	39
Checking for power problems	39
Problem determination tips	40
Chapter 5. Diagnostics	43
Lenovo ThinkVantage Toolbox	43
Lenovo Solution Center	43
PC-Doctor for DOS	44
Creating a diagnostic disc	44
Running the diagnostic program from a diagnostic disc	44
Navigating through the diagnostics programs	44
Running tests	45
Viewing the test log	46
Chapter 6. Using the Setup Utility program	47
Starting the Setup Utility program	47
Viewing and changing settings	47
Using passwords	47
Password considerations	48
Power-On Password	48
Administrator Password	48
Hard Disk Password	48
Setting, changing, and deleting a password	48
Erasing lost or forgotten passwords (clearing CMOS)	49
Enabling or disabling a device	49
Selecting a startup device	50
Selecting a temporary startup device	50
Selecting or changing the startup device sequence	50
Smart performance choices	50
Exiting from the Setup Utility program	51
Chapter 7. Symptom-to-FRU index	53
Hard disk drive boot error	53
Diagnostic error codes	53
Beep symptoms	69
POST error codes	69
Miscellaneous error messages	71
Undetermined problems	72
Chapter 8. Replacing FRUs	75
Locations	75
Locating connectors, controls, and indicators on the front of yo	75
Locating connectors on the rear of your computer	76
Locating components	77
Locating parts on the system board	77
Opening the computer cover	78
Removing and reinstalling the front bezel	79
Installing or replacing a memory module	80
Installing or replacing the PCI card	81
Replacing the hard disk drive	83
Replacing the optical drive	84
Replacing the battery	86
Replacing the heat sink	87
Replacing the microprocessor	89
Replacing the system board	92
Replacing the system fan assembly	94
Replacing the internal speaker	97
Replacing the front audio and USB assembly	98
Replacing the ac power adapter	100
Replacing the ac power adapter bracket	101
Completing the parts replacement	104
Chapter 9. FRU lists	105
Overall MT: 0266, 0384, 2491, 4168, 5027, 5067, , and 7519	105
Mechanical FRUs	117
Keyboard and Mouse	122
Adapters and miscellaneous FRUs	158
Power Cords	160
Recovery discs	168
Windows 7 Professional 32 Recovery CD	168
Windows 7 Home Basic 32 Recovery CD	174
Windows 7 Home Premium 64 Recovery CD	175
Windows 7 Home Premium 32 Recovery CD	178
Windows XP Professional 32 Recovery CD	179
Windows 7 Professional 64 Recovery CD	182
Windows XP Professional Generic Recovery CD	187
Windows Vista Business 32 Recovery CD	188
Windows Vista Home Basic 32 Recovery CD	189
Chapter 10. Additional service information	191
Security features	191
Hardware-controlled passwords	191
Operating system password	191
Vital Product Data	191
Secure Managed Client	191
BIOS levels	191
Updating (flashing) the BIOS from a disc	192
Updating (flashing) the BIOS from your operating system	192
Recovering from a POST/BIOS update failure	193
Power management	193
Automatic configuration and power interface (ACPI) BIOS	193
Automatic Power-On features	193
Appendix A. Notices	195
Television output notice	196
Trademarks	196

Match case Limit results 1 per page

Diagnostic Error Code

FRU/Action

030-196-XXX

SCSI interface test halt, error threshold

exceeded

1. Press F3 to review the log ﬁle.

2. Restart the test to reset the log ﬁle.

030-197-XXX

SCSI interface test warning

1. Make sure the component that is called out is

connected and/or enabled. See Chapter 6 “Using the

Setup Utility program” on page 41.

2. Re-run the test.

3. Replace the component that is called out in warning

statement.

4. Replace the component under test.

030-198-XXX

SCSI interface test aborted

1. If a component is called out, make sure it is

connected and/or enabled. See Chapter 6 “Using the

Setup Utility program” on page 41.

2. Flash the system and re-test. See “Updating

(ﬂashing) the BIOS from a disc” on page 186.

3. Go to “Undetermined problems” on page 66.

030-199-XXX

SCSI interface test failed, cause unknown

1. Go to “Undetermined problems” on page 66.

2. Flash the system and re-test. See “Updating

(ﬂashing) the BIOS from a disc” on page 186.

3. Replace component under function test.

035-000-XXX

RAID interface Test Passed

No action

035-0XX-XXX

RAID interface Failure

1. RAID signal cable

2. RAID device

3. RAID adapter card, if installed

4. System board

035-195-XXX

RAID interface Test aborted by user

Information only Restart the test, if necessary.

035-196-XXX

RAID interface test halt, error threshold

exceeded

1. Press F3 to review the log ﬁle.

2. Restart the test to reset the log ﬁle.

035-197-XXX

RAID interface test warning

1. Make sure the component that is called out is

connected and/or enabled. See Chapter 6 “Using the

Setup Utility program” on page 41.

2. Re-run the test.

3. Replace the component that is called out in warning

statement.

4. Replace the component under test.

035-198-XXX

RAID interface test aborted

1. If a component is called out, make sure it is

connected and/or enabled. See Chapter 6 “Using the

Setup Utility program” on page 41.

2. Flash the system and re-test. See “Updating

(ﬂashing) the BIOS from a disc” on page 186.

3. Go to “Undetermined problems” on page 66.

035-199-XXX

RAID interface test failed, cause unknown

1. See “Undetermined problems” on page 66.

2. Flash the system and re-test. See “Updating

(ﬂashing) the BIOS from a disc” on page 186.

3. Replace component under function test.

071-000-XXX

Audio port Interface Test Passed

No action

Chapter 7

Symptom-to-FRU index