Lenovo ThinkPad 600E ThinkPad 600 Suppliment to the User's Guide - Page 167
Installing the IDE Driver for Windows NT, IDE CD-ROM Atapi 1.2/Dual Channel PCI IDE - ide controller driver
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
13 Restart your computer to make the new settings effective. Installing the IDE Driver for Windows NT Install the ThinkPad PIIX4 IDE driver as follows: | 1 Start Windows NT and log on with the user ID authorized as an | administrator. 2 Insert the IDE Driver Diskette into the diskette drive. 3 Click on Start. 4 Click on Settings and Control Panel. 5 Double-click on SCSI Adapters. 6 Click on the Drivers tab. 7 If Intel PIIX PCI Bus Master IDE Controller is listed, remove it. 8 If IDE CD-ROM (Atapi 1.2)/Dual Channel PCI IDE is listed, remove it. 9 Click on Add. 10 Click on Have Disk... 11 Click on OK after confirming that the installation path is correct (usually it points to A:\). 12 Select ThinkPad PIIX4 IDE Driver; then click on OK. 13 If you are prompted to restart your computer, remove the diskette from the diskette drive and click on Yes. Chapter 8. Installing Software 161