Lenovo ThinkPad 600E ThinkPad 600 Suppliment to the User's Guide - Page 176
Installing OS/2 Warp, Dual Boot, Boot Manager - how to boot to cd
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
3 When you are prompted to insert Disk 1, use the new diskettes created in step 1. | 4 When you are prompted to insert Disk 2, use the new diskettes | created in step 1. 5 Go to the next section to install OS/2 Warp Version 4. Installing OS/2 Warp Your installation of OS/2 depends on whether you use the Dual Boot or the Boot Manager for switching between OS/2 and DOS/Windows 3.11. If you use the Dual Boot, go to next step. If you use the Boot Manager, install the Boot Manager first. Then go to next step. (Refer to the OS/2 documentation for installing Boot Manager.) 1 Install DOS, Windows, and the ThinkPad Configuration program before installing OS/2. Notes: a) To install the ThinkPad Configuration for DOS the ThinkPad Configuration Program for DOS Installing b) To install the ThinkPad Configuration for Windows 3.11 Installing the ThinkPad Configuration Program for Windows 3.11 2 Install OS/2 by referring to the OS/2 documentation. Pay attention to the following when you install OS/2: Select VGA as the Primary Display in the "System Configuration" window. Select No Support Installed, not PCMCIA Feature, in the "System Configuration" window. (For using the CD-ROM drive:) Select Non-Listed IDE CD-ROM or IDE CD-ROM for the CD-ROM in the "System Configuration" window. After OS/2 has been successfully installed, restart the computer. 170 IBM ThinkPad 600 Online Book