Lenovo ThinkPad 600E ThinkPad 600 Suppliment to the User's Guide - Page 199
Enabling or Disabling a Flash (POST/BIOS) Update from the Network
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
3 Double-click on the Network icon. The "Automatic Power on Startup Sequence" window appears. 4 Define a sequence by clicking on the devices in the order you want them to start. The devices you choose appear in boxes 1 to 4. 5 Click on OK. Note If you want to change the settings, click on Reset and make the settings again. Enabling or Disabling a Flash (POST/BIOS) Update from the Network When a Flash (POST/BIOS) update from the network is enabled, the system programs in your computer can be updated remotely by a network administrator from a management console. The following requirements must be met, however: Update Flash from Network must also be enabled. (See the following steps.) Your computer must be started over the LAN. Your computer must be engaged in a remote program load. Network-management software is required in the remote administrator's computer. To enable or disable the Flash (POST/BIOS) update from Network setting, do the following: 1. Double-click on the CONFIG icon. The "Configuration" window appears. 2. Double-click on the Network icon. The "Network" window appears. 3. Select either the Enable or the Disable button besides "Flash." Appendix A. Using System Management 193