Lenovo ThinkPad 600E ThinkPad 600 Suppliment to the User's Guide - Page 55

Drivers Note CardWizard determines the type of device driver being used. It also displays whether the card is configured by Windows 95 or by CardWorks. Card driver: Indicates whether Plug-and-Play mode or CardSoft mode is used in configuring the PC Card. This field is enabled only if the Change card driver box is checked. You should not change drivers if your card has been identified and configured successfully. Change card driver: If this item is enabled (checked), you can select either Plug and Play (if available) or the CardWorks device drivers. Remove from the Plug-and-Play hardware list: If this item is enabled (checked), you can delete the Plug-and-Play device driver assigned to a card. This applies only if the card is handled by Windows 95 (Plug-and-Play mode). Later, when you reinsert the same PC Card, CardWorks configures the card as if it were the first insertion. Memory Card Utility: This item appears only if you insert an SRAM card or a Flash memory card. You can format the SRAM card or Flash memory card as follows: Note You can also format these card from the file system with the DOS FORMAT command. 1. Open the "PC Card Properties" window. 2. Select the Memory Card Utility tab. 3. Enter a Volume Label (if desired). 4. Click on Format Drive/Partition. Chapter 5. Using Your Computer with a PC Card 49