Lenovo ThinkPad 600E ThinkPad 600 Suppliment to the User's Guide - Page 72
Updating the CONFIG.SYS File, Registered Drivers and Standard Rules
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Note The current resource information is set as the default and appears in the input field of each item. The number that can be set is displayed in the pull-down list box. 4 You can change the following registered information for the PC Card. The items that can be changed differ depending on the PC Card. Card ID I/O port address IRQ level COM number of the serial port Memory window address Memory window size Card offset address 5 Click on the OK button, and save the changes. To cancel the changes, click on the Cancel button. Updating the CONFIG.SYS File For PC Card Director to work correctly, the PC Card device drivers must be registered in the CONFIG.SYS file. These drivers are automatically registered in the CONFIG.SYS file when you install PC Card Director following the instructions in Chapter 8, Installing Software. The following section describes the standard rules for each driver registered in the CONFIG.SYS file for your reference. Registered Drivers and Standard Rules The following is a sample of a CONFIG.SYS file: 66 IBM ThinkPad 600 Online Book