Lenovo ThinkPad Edge E520 (English) User Guide - Page 112
into the socket at an angle of about 20 degrees; then press it in firmly
View all Lenovo ThinkPad Edge E520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
5. If the two SO-DIMMs are already in the memory slots, press out on the latches on both edges of the socket at the same time 1 , and then remove an SO-DIMM 2 to make room for the new one. Be sure to save it for future use. 6. Find the notch on the contact edge side of the SO-DIMM you are installing. Attention: To avoid damaging the SO-DIMM, do not touch its contact edge. 7. With the notched end of the SO-DIMM toward the contact edge side of the socket, insert the SO-DIMM 1 into the socket at an angle of about 20 degrees; then press it in firmly 2 . Note: If you install a memory module in only one of the two memory slots, install it in the bottom slot. 8. Pivot the SO-DIMM downward until it snaps into place. 9. Make sure that the SO-DIMM is firmly fixed in the slot and cannot be moved easily. 94 User Guide