Lenovo ThinkServer RD330 (English) Installation and User Guide - Page 132
Do not touch the gold contacts on the bottom of the microprocessor., kept as clean as possible.
View all Lenovo ThinkServer RD330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
6. Locate the microprocessor socket, press down the small handle on the microprocessor socket, and then pull the handle a little bit outward to release it from the secured position. Then, gently press the microprocessor retainer to open it. Ensure that the small handle and the microprocessor retainer are in the fully open position. Figure 67. Opening the handle and microprocessor retainer 7. Touch only the edges of the microprocessor and carefully lift it straight up and out of the microprocessor socket. Place the old microprocessor on a static-protective surface. Notes: • Do not touch the gold contacts on the bottom of the microprocessor. • Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. Figure 68. Removing the microprocessor 120 ThinkServer RD330 User Guide