Lenovo ThinkServer RD330 (English) Installation and User Guide - Page 41
Mini-SAS to mini-SAS signal cable connections
View all Lenovo ThinkServer RD330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
The following illustrations show the connectors on the backplane for 2.5-inch hard disk drives. Figure 19. Front view of the backplane for 2.5-inch hard disk drives 1 Slot 0 for a 2.5-inch hard disk drive 2 Slot 2 for a 2.5-inch hard disk drive 3 Slot 4 for a 2.5-inch hard disk drive 4 Slot 5 for a 2.5-inch hard disk drive 5 Slot 3 for a 2.5-inch hard disk drive 6 Slot 1 for a 2.5-inch hard disk drive Figure 20. Rear view of the backplane for 2.5-inch hard disk drives 1 8-pin power connector 2 Mini-SAS ports 4-5 3 Mini-SAS ports 0-3 4 Optical drive power connector 1 8-pin power connector Used to connect a power cable to provide power to the backplane. 2 Mini-SAS ports 4-5 Used to connect the mini-SAS connector on one end of a mini-SAS to mini-SAS signal cable to support the hard disk drive 4 to hard disk drive 5. 3 Mini-SAS ports 0-3 Used to connect the mini-SAS connector on one end of a mini-SAS to mini-SAS signal cable to support the hard disk drive 0 to hard disk drive 3. 4 Optical drive power connector Used to connect the power cable for the slim optical drive if the server has one installed. Mini-SAS to mini-SAS signal cable connections This topic provides instructions on the following mini-SAS to mini-SAS signal cable connections: • Connecting cables from the system board to the backplane Chapter 3. Product overview 29