Lenovo U110 U110 User's Guide V1.0 - Page 47
To set a User Password, Password Check, Always, Supervisor, Password, Installed, Not Installed
UPC - 884343105529
View all Lenovo U110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 2. Using Your Computer Note: Make sure the Password Check is set to Always if you need the password protection at power on. If password have been set, the Supervisor Password will show Installed; otherwise it will show Not Installed. To set a User Password: Only Supervisor password have been set, User password can be set. 1 Turn on your computer. Press F2, while the initial screen is displayed. The BIOS Setup Utility screen opens. 2 Select Security, using the cursor directional keys. 3 Select Set User Password, and press the Enter key. The Set User Password window opens. 4 Choose your User password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field. 5 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 6 Commit your password to memory, and press the Enter key. 7 Press F10 to exit. 8 Select OK in the Setup Confirmation window. 36