Lexmark CX310 User's Guide - Page 90
Network Card menu, TCP/IP menu, Network/Ports, Standard Network, Network [x], Network [x] Setup
View all Lexmark CX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Understanding the printer menus 90 Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card • Network/Ports > Network [x] > Network [x] Setup > Network Card Use To View Card Status Connected Disconnected View the connection status of the network card. View Card Speed View the speed of an active network card. Network Address UAA LAA View the network addresses. Job Timeout 0, 10-225 seconds Set the amount of time it takes for a network print job to be canceled. Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value between 1 and 9 is selected, then Invalid appears on the display, and the value is not saved. TCP/IP menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > TCP/IP • Network/Ports > Network [x] > Network [x] Setup > TCP/IP Note: This menu is available only in network printers or printers attached to print servers. Use Set Hostname IP Address Netmask Gateway Enable DHCP On Off Enable RARP On Off To Set the current TCP/IP host name. Note: This can be changed only from the Embedded Web Server. View or change the current TCP/IP address. Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. View or change the current TCP/IP netmask. View or change the current TCP/IP gateway. Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Specify the RARP address assignment setting. Note: Off is the factory default setting.