Lexmark CX431 Users Guide PDF - Page 102
Ethernet, PCL SmartSwitch, Mac Binary PS, Notes, Network Speed
View all Lexmark CX431 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Use printer menus 102 Menu item PCL SmartSwitch On* Off PS SmartSwitch On* Off* Mac Binary PS Auto* On Off Description Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Set the printer to process Macintosh binary PostScript print jobs. Notes: • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Ethernet Menu item Description Network Speed Show the speed of an active network adapter. IPv4 Enable DHCP On* Off Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information to clients in a dynamic manner. IPv4 Set Static IP Address IP Address Netmask Gateway Set the static IP address of your printer. IPv6 Enable IPv6 Off On* Enable IPv6 in the printer. IPv6 Enable DHCPv6 Off* On Enable DHCPv6 in the printer. IPv6 Stateless Address Autoconfiguration Off On* Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router. Note: An asterisk (*) next to a value indicates the factory default setting.