Lexmark X443 Setup and User's Guide - Page 90
Cleaning and maintenance
View all Lexmark X443 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Cleaning and maintenance OptraImage 212/222, 312/322, Color 1200, T612 Cleaning the ADF Pad assembly Feeding roller Clean the scan unit if documents do not feed smoothly or easily, or if several documents feed at one time. The scan unit parts may be contaminated with ink, toner particles or paper coatings. 1 Wet a clean, lint-free cloth or cotton swab with Isopropyl alcohol (95%). 2 Open the ADF unit and wipe the upper feeding roller by moving the swab from side to side. 3 Rotate the roller forward with your finger and repeat the above cleaning procedures until the entire roller is cleaned. Be careful not to snag or damage the pick springs. 4 Wipe the pad in the direction from top to bottom. Be careful not to hook the pick springs. 5 Close the ADF unit. Your scan unit is now ready for use. 82