Home » Lexmark Manuals » Multifunction Devices » Lexmark X782e » Manual Viewer

Lexmark X782e IPDS Emulation Userâ€™s Guide - Page 53

Offset Stacking, 5.1.1 AS/400 and iSeries Offset Stacking

Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

5.1 Offset Stacking Offset stacking of IPDS jobs is available when offset stacking is supported in the printer standard bin or when an optional finisher with offset stacking capability is installed. For offset stacking to occur, the following must happen: • Host Controlled must be selected in Option Card Menu > IPDS MENU > EMULATION > PAPER HANDLING > Offset Stacking. Host Controlled is the default value. See section 3.5.2 on page 33 for additional information. • Offset stacking commands must be received with the IPDS job. • The bin selection specified in the IPDS job must be mapped to a bin that supports offset stacking. See MAP OUTPUT BINS Menu Options on page 40 for additional information on bin mapping. Output bin selection takes precedence over offset stacking. Hole punching may be performed with offset stacking. Note: The Offset Pages menu item under the printer's Settings > Finishing Menu does not affect offset stacking of IPDS jobs. Note: Offset stacking is not supported for all papers sizes or types. Refer to your finisher or printer documentation for additional information. 5.1.1 AS/400 and iSeries Offset Stacking When offset stacking is available, the IPDS emulation reports to the host that offset stacking is supported. The AS/400 and iSeries automatically send offset stacking commands with each job. The host default output bin selection number is 1, which selects the printer standard bin. If the printer supports offset stacking in the standard bin, the job will be offset. Following are different ways to ensure that jobs are offset. The following examples assume that an optional finisher is installed and offset stacking is supported in the finisher physical bin 1. • Change the host output bin selection number to 2 in the default printer file using the CHGPRTF command. (Assumes printer default bin mappings.) • Create a new printer file using the CRTPRTF command and set the host output bin selection number to 2. (Assumes printer default bin mappings.) • In the printer's Option Card Menu > IPDS MENU > MAP OUTPUT BINS menu, change Bin Mapping 1 output bin value from Standard Bin to Bin 1. (Assumes the host output bin selection number is 1.) This routes all jobs that would normally have gone to the printer standard bin to finisher bin 1, which supports offset stacking. See MAP OUTPUT BINS Menu Options on page 40 for details on bin mapping. The following examples assume that an optional finisher is installed and offset stacking is supported in the finisher physical bin 2. • Change the host output bin selection number to 3 in the default printer file using the CHGPRTF command. (Assumes printer default bin mappings.) • Create a new printer file using the CRTPRTF command and set the host output bin selection number to 3. (Assumes printer default bin mappings.) • In the printer's Option Card Menu > IPDS MENU > MAP OUTPUT BINS menu, change Bin Mapping 1 output bin value from Standard Bin to Bin 2. (Assumes the host output bin selection number is 1.) This routes all jobs that would normally have gone to the printer standard bin to 53

Section	Page
Title Page	1
Notice	2
Trademarks and Credits	2
Table of Contents	3
1 Introduction	8
1.1 About This Guide	8
1.2 Equipment Requirements and Specifications for IPDS Emulation Printing	8
1.3 Customer Support	9
1.4 Conventions Used in the Manual	10
2 Using the Operator Panel or Touch Screen for IPDS MENU Setup	11
2.1 IPDS MENU Setup Options vs. Printer Setup Options	11
2.2 Changing IPDS Settings Using the Operator Panel	12
2.2.1 Accessing the IPDS MENU	12
2.2.2 Example: Selecting a New Value as a Setting	12
2.2.3 Example: Changing a Numerical Setting	14
2.2.4 Saved Option Changes Become Active on New Session	15
2.2.5 Printing the Menu Settings Page (printers)	15
2.3 Changing IPDS Settings Using the MFP Touch Screen	16
2.3.1 Accessing the IPDS MENU	16
2.3.2 Example: Selecting a New Value as a Setting	16
2.3.3 Example: Changing a Numerical Setting	17
2.3.4 Saved Option Changes Become Active on New Session	17
2.3.5 Printing the Menu Settings Page (MFPs)	18
3 Setup Operations Reference	19
3.1 IPDS MENU - Map of All Options	19
3.2 Overview of EMULATION Menu Options and Values	20
3.3 EMULATION – Options Descriptions	22
3.3.1 IPDS Emulation	22
3.3.2 Host Resolution	22
3.3.3 Color Processing	23
3.3.4 Text Processing	23
3.3.5 Toner Saver	23
3.3.6 BAR CODE	23
3.3.7 DEFAULT CODEPAGE	24
3.3.8 Codepage Version	25
3.3.9 DEFAULT FGID	25
3.3.10 Default CPI	25
3.3.11 Page Counter	25
3.3.12 Printable Area	26
3.3.13 Exception Control	27
3.3.14 Font Control	27
3.3.15 Font Type	27
3.3.16 IPDS Print Res	28
3.3.17 Intervention Required	28
3.3.18 IPDS Timeout	29
3.3.19 Print IPDS Fonts	30
3.3.20 Trace Functions	31
3.3.21 IPDS Version	31
3.4 Overview of PAPER HANDLING Menu Options and Values	32
3.5 PAPER HANDLING Menu – Option Descriptions	33
3.5.1 IPDS Blank Pages	33
3.5.2 Offset Stacking	33
3.5.3 UNIVERSAL SIZE	33
3.5.4 OTHER ENV SIZE	34
3.6 MAP INPUT TRAYS Menu Options	37
3.7 MAP OUTPUT BINS Menu Options	40
3.7.1 Descriptions of Output Bin Values	40
3.7.2 Descriptions of IPDS Bin Selection Numbers	41
3.7.3 Default Bin Mapping	41
3.8 MARGINS Menu Options	42
3.8.1 ALL INPUT TRAYS Menu	44
3.8.2 TRAY 1 ADJUST Menu	44
3.8.3 TRAY 2 ADJUST Menu	45
3.8.4 TRAY 3 ADJUST Menu	45
3.8.5 TRAY 4 ADJUST Menu	45
3.8.6 TRAY 5 ADJUST Menu	46
3.8.7 MP FEEDER ADJUST Menu	46
3.8.8 ENV FEEDER ADJ Menu	46
3.8.9 MANUAL PAPER ADJ Menu	47
3.8.10 MANUAL ENV ADJ Menu	47
3.9 Overview of the FONT CAPTURE Menu Options	48
3.10 FONT CAPTURE Menu Options	49
3.10.1 Capture Fonts	49
3.10.2 Remove Fonts	49
4 Duplex Printing Using Preprinted Media	50
5 Finishing Support	51
5.1 Offset Stacking	53
5.1.1 AS/400 and iSeries Offset Stacking	53
5.1.2 Mainframe Offset Stacking	54
5.2 Stapling	56
5.2.1 AS/400 and iSeries Stapling	56
5.2.2 Mainframe Stapling	63
5.3 Hole Punching	66
5.3.1 Hole Punching From an Input Source	66
5.3.2 Hole Punching to an Output Bin	67
6 IPDS Job Cancel	68
6.1 Canceling IPDS Jobs	68
6.2 How to Cancel a Job Using the Printer Operator Panel	68
6.3 How to Cancel a Job Using the MFP Touch Screen	69
7 Working with Captured Fonts	70
7.1 Capture Font and Remove Font	70
7.2 Preparing Fonts for Capture	70
7.2.1 Capturing Fonts from an AS/400 or iSeries	71
7.2.2 Capturing Fonts from a Mainframe Host	72
8 Remote Configuration of Printer IPDS Settings	76
8.1 Why Use a Browser	76
8.2 Remote Configuration Using a Browser	76
8.3 Functions that Can Not be Operated Remotely	77
9 Printer Messages and Problems	78
10 Command Reference	79
10.1 XOA Print Quality Control	79
10.2 XOH OPC Product Identifier Self Defining Field	80
10.3 Finishing Operations Self-Defining Field	81
10.4 N-up Printing	81
10.5 Color and Simulated Grey Scale Printing	82
10.6 TrueType Fonts	82
10.7 Object Container Support	82
10.8 IO Images as Resources	82
10.9 Media Reporting by Object ID (OID)	83
11 Warranty	85
Appendices	86
A. Technical Specifications	87
A.1 Product Description	87
A.2 IPDS Features List	87
A.3 For Direct Network Attachment	88
A.4 For Direct Twinaxial Attachment	89
A.5 For Direct Coaxial Attachment	90
B. Font and Code Page Information	91
B.1 International Language Definitions	91
B.1.1 Latin 1	91
B.1.2 Latin 2/ROECE, Latin 3, Latin 4, Latin 5	91
B.1.3 Cyrillic and Greek	92
B.1.4 Arabic and Hebrew	92
B.1.5 Japanese (non-Latin)	92
B.2 About the Three Types of Supported Font Sets	92
B.3 Compatibility Font Sets	93
B.3.1 4028 Compatibility Font Set - 300 dpi bitmap fonts (Resident Emulation)	93
B.3.2 3812/3816 Compatibility Font Set - 240 dpi bitmap fonts	95
B.4 IBM Core Interchange Scalable Font Set	97
B.5 IBM Core Interchange Font Set Code Page Support	98
B.5.1 Latin 1 Country Extended Code Pages	98
B.5.2 Latin 1 EBCDIC Publishing Code Pages	99
B.5.3 Latin 1 ASCII Code Pages	99
B.5.4 Latin 2, 3, 4, 5, and 9 Code Pages	99
B.5.5 Latin EBCDIC DCF Code Pages	100
B.5.6 Cyrillic and Greek Code Pages	100
B.5.7 Arabic Code Pages	101
B.5.8 Hebrew Code Pages	101
B.5.9 Symbol Code Pages	101
B.6 IBM Coordinated Font Set	102
B.6.1 OCR Scalable Font Set	102
B.7 POSTNET Font Support	103
B.8 Font Substitution	104
B.8.1 Resident Emulation Font Substitution	104
B.8.2 3812/3816 Emulation Font substitution	105
C. Bar Code Support: Linear (1-D) Bar Codes	106
D. Bar Code Support: 2-D Bar Codes	113
D.1 Data Matrix Special Function Parameter Support	114
D.2 MaxiCode Special Function Parameter Support	115
D.3 PDF417 Special Function Parameter Support	115
D.4 QR Code (Quick Response Code)	115
E. Printing DBCS Characters	117
F. Memory Requirements and Recommendations	118
G. Related Publications	121
H. Glossary	122

Match case Limit results 1 per page

5.1 Offset Stacking

Offset stacking of IPDS jobs is available when offset stacking is supported in the printer standard bin or

when an optional finisher with offset stacking capability is installed. For offset stacking to occur, the

following must happen:

•

Host Controlled

must be selected in

Option Card Menu > IPDS MENU > EMULATION >

PAPER HANDLING > Offset Stacking

Host Controlled

is the default value. See section 3.5.2

on page 33 for additional information.

•

Offset stacking commands must be received with the IPDS job.

•

The bin selection specified in the IPDS job must be mapped to a bin that supports offset stacking.

See MAP OUTPUT BINS Menu Options on page 40 for additional information on bin mapping.

Output bin selection takes precedence over offset stacking.

Hole punching may be performed with offset stacking.

Note:

The

Offset Pages

menu item under the printer’s

Settings > Finishing Menu

does not affect offset

stacking of IPDS jobs.

Note:

Offset stacking is not supported for all papers sizes or types. Refer to your finisher or printer

documentation for additional information.

5.1.1

AS/400 and iSeries Offset Stacking

When offset stacking is available, the IPDS emulation reports to the host that offset stacking is supported.

The AS/400 and iSeries automatically send offset stacking commands with each job. The host default

output bin selection number is 1, which selects the printer standard bin. If the printer supports offset

stacking in the standard bin, the job will be offset.

Following are different ways to ensure that jobs are offset. The following examples assume that an

optional finisher is installed and offset stacking is supported in the finisher physical bin 1.

•

Change the host output bin selection number to 2 in the default printer file using the

CHGPRTF

command. (Assumes printer default bin mappings.)

•

Create a new printer file using the

CRTPRTF

command and set the host output bin selection

number to 2. (Assumes printer default bin mappings.)

•

In the printer’s

Option Card Menu > IPDS MENU > MAP OUTPUT BINS

menu, change

Bin

Mapping 1

output bin value from

Standard Bin

Bin 1

. (Assumes the host output bin selection

number is 1.) This routes all jobs that would normally have gone to the printer standard bin to

finisher bin 1, which supports offset stacking. See MAP OUTPUT BINS Menu Options on page 40

for details on bin mapping.

The following examples assume that an optional finisher is installed and offset stacking is supported in

the finisher physical bin 2.

•

Change the host output bin selection number to 3 in the default printer file using the