Lexmark X9575 User's Guide - Page 208

Photo smudges or scratches To prevent photo smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing. Checking the print cartridges ARE THE PRINT CARTRIDGES PROPERLY INSTALLED? For more information, see "Installing print cartridges" on page 178. ARE THE STICKER AND TAPE REMOVED FROM THE CARTRIDGES? Lift the scanner unit. Press down on the cartridge carrier latches to raise the cartridge carrier lids. ARE THE CARTRIDGES LOW ON INK? 1 Do one of the following: • In Windows Vista, click . • In Windows XP and earlier, click Start. 2 Click Programs or All Programs ŒLexmark 9500 Series. 3 Click Solution Center. 4 If an exclamation point (!) appears on a cartridge, the ink level is low. Install a new cartridge. For more information, see "Installing print cartridges" on page 178. For cartridge-ordering information, see "Ordering paper and other supplies" on page 185. Ink levels seem incorrect These are possible solutions. Try one or more of the following: ARE YOU PRINTING GRAPHICS OR PHOTOS? When you print documents with a large number of graphics, or when you print using the Best setting on the Print Setup tab, the printer uses more ink. The type of documents you print and the print quality you select affect the amount of ink the printer uses. ARE YOU PRINTING A LARGE FILE? The ink levels displayed in the printer software are not updated during a print job; they represent the ink level at the beginning of a print job. The ink levels may seem inconsistent in the Printing Status window when you are printing a large file. Troubleshooting 208