Linksys NSS2000 Cisco NSS2000 Series Network Storage System Getting Started Gu - Page 14
Step 2 - Log into the NSS Configuration Interface, Configuring the Network Storage System NSS - default ip address
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Configuring the Network Storage System (NSS) Step 2 - Log into the NSS Configuration Interface 3 To set up your computer to communicate with the NSS: STEP 1 Set your computer's network settings to the following: • IP Address: 169.254.x.y (where x and y can be any number between 1 and 254). For example, 169.254.1.2. • Subnet Mast (Netmask): 255.255.0.0. After you configure your computer, you can log into the NSS configuration interface. You can configure the NSS network IP settings as required. Step 2 - Log into the NSS Configuration Interface To log into the configuration interface: STEP 1 If you are logging into the NSS for the first time, write down the MAC address located on the sticker attached to the bottom of the chassis. You need the MAC address as this is part of the default hostname. Otherwise, skip this step. STEP 2 There are a variety of ways to display the NSS Login window. • Open the Web browser on your computer: In the Address field, enter http://NAS
![](/manual_guide/products/linksys-nss2000-cisco-nss2000-series-network-storage-getting-started-guide-c7c07cc/14.png)