Linksys NSS2000 Cisco NSS2000 Series Network Storage System Getting Started Gu - Page 17
Step 3 - Use the Quick Setup Wizards to Con the NSS, System Status, Manager Menu, Initial Setup
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Configuring the Network Storage System (NSS) Step 3 - Use the Quick Setup Wizards to Configure the NSS 3 STEP 5 It is a good idea to do a quick check of the information on the System Status page to ensure that your hardware installation was successful and that this system is not reporting any errors. For example, the Ethernet link is up and in good condition, the right number of disk drives installed appear, and so on. For a detailed description of the information on the System Status page, click the Help button in the upperright corner. Step 3 - Use the Quick Setup Wizards to Configure the NSS There are three wizards available from the Manager Menu of the configuration interface: • Initial Setup: This wizard automatically appears when you log into the configuration interface for the first time. Although you can access it at any time from the Manager Menu, if you have saved any configuration settings before you run the wizard, note that running the wizard will erase any saved data. For example, if you configure a RAID and then run the wizard, the RAID will be deleted. This wizard steps you through the basic configuration to create a RAID, volume, share, user, to set the Home Directory location, set the time, and so on. (For detailed help on the full set of configuration options, NSS2000 Getting Started Guide 13
![](/manual_guide/products/linksys-nss2000-cisco-nss2000-series-network-storage-getting-started-guide-c7c07cc/17.png)