Linksys NSS2000 Cisco NSS2000 Series Network Storage System Getting Started Gu - Page 28
System LED (Front Panel), Power, Graceful Shutdown, Hard Shutdown, System, Solid Yellow, Solid Red
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
LEDs & Buttons System LED (Front Panel) A The Power button lets you do a graceful or hard shutdown of the NSS: • Graceful Shutdown: Press the Power button for 1 to 2 seconds to trigger a graceful shutdown of the NSS. • Hard Shutdown: Press the Power button and hold for about eight seconds. You would choose this option only if the NSS is not responding to a graceful shutdown. System LED (Front Panel) The System LED can be in any of the following conditions, depending on the current type of system error on the NSS: • Solid Yellow: The administrator needs to look into the exact error condition through the configuration interface as one of the following has occurred: - A volume is more than 90% full. - A disk drive has failed or is about to fail. - A fan has stalled. - The system temperature is above the maximum threshold. - The temperature of a disk drive is above the maximum threshold. - A voltage rail is above or below specification. - The NSS is running on UPS due to a mains power failure. • Solid Red: There is a critical system failure. The system could not boot due to a corrupted firmware image. In this case, contact your support representative. • Off: There are no system-related problems. NSS2000 Getting Started Guide 24
![](/manual_guide/products/linksys-nss2000-cisco-nss2000-series-network-storage-getting-started-guide-c7c07cc/28.png)