Linksys NSS2000 Cisco NSS2000 Series Network Storage System Getting Started Gu - Page 16
login, Select the NAS device to which you want to connect from the li, window appears - default password
![]() |
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Configuring the Network Storage System (NSS) Step 2 - Log into the NSS Configuration Interface 3 • Click Install to start the installation process. Follow the onscreen instructions to install the application. When the process completes, the NAS Discovery window appears. • Select the NAS device to which you want to connect from the list. Click Connect To GUI. The login window appears. STEP 3 Enter the administrator login information. When you first log into the configuration interface or if you reset the factory defaults, both the username and password are set to admin. STEP 4 Click OK. The NSS configuration interface appears. The configuration wizard automatically begins. NSS2000 Getting Started Guide 12
![](/manual_guide/products/linksys-nss2000-cisco-nss2000-series-network-storage-getting-started-guide-c7c07cc/16.png)
Configuring the Network Storage System (NSS)
Step 2 — Log into the NSS Configuration Interface
NSS2000 Getting Started Guide
12
3
•
Click
Install
to start the installation process. Follow the onscreen
instructions to install the application. When the process completes, the NAS
Discovery window appears.
•
Select the NAS device to which you want to connect from the li
st. Click
Connect To GUI
. Th
e
login
window appears
.
STEP 3
Enter the administrator login information. When you first log into the configuration
interface or if you reset the factory defaults, both the username and password are
set to
admin
.
STEP 4
Click
OK
. The NSS configuration interface appears. The configuration wizard
automatically begins.