Linksys NSS2000 Cisco NSS2000 Series Network Storage System Getting Started Gu - Page 29

Reset Button (Front Panel), LAN LED (Front Panel), Reset

Get Linksys NSS2000 - Gigabit Storage System Chassis PDF manuals and user guides
UPC - 745883577088
View all Linksys NSS2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

LEDs & Buttons Reset Button (Front Panel) A Reset Button (Front Panel) The Reset button lets you restore the network setting system defaults or reset the box. • To restore the network setting system defaults: You need to do this if the configuration interface becomes inaccessible. To reset the network setting system defaults, shut down the NSS, hold down the Reset button, and then power up the NSS. When you see the Power LED blink yellow rapidly, release the Reset button. The network settings are restored to factory defaults. • To reset the box: Press and hold the Reset button while the system is running until the Power LED begins to blink green. Release the Reset button. LAN LED (Front Panel) The LEDs on the front panel indicate the status of the LAN link: • Solid Green: The LAN link is up and running at 1000 link speed, but is currently idle. • Flickering Green: The LAN link is up and running at 1000 link speed and is currently active. The LED flickers off with activity. • Solid Yellow: The LAN link is up and running at 10/100 link speed, but is currently idle. • Flickering Yellow: The LAN link is up and running at 10/100 link speed and is currently active. The LED flickers off with activity. • Off: No LAN link is detected. NSS2000 Getting Started Guide 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
LEDs & Buttons
Reset Button (Front Panel)
NSS2000 Getting Started Guide
25
A
Reset Button (Front Panel)
The
Reset
button lets you restore the network setting system defaults or reset the
box.
•
To restore the network setting system defaults
:
You need to do this if the
configuration interface becomes inaccessible. To reset the network setting
system defaults, shut down the NSS, hold down the
Reset
button, and then
power up the NSS. When you see the
Power
LED blink yellow rapidly,
release the
Reset
button. The network settings are restored to factory
defaults.
•
To reset the box
:
Press and hold the
Reset
button while the system is
running until the
Power
LED begins to blink green. Release the
Reset
button.
LAN LED (Front Panel)
The LEDs on the front panel indicate the status of the LAN link:
•
Solid Green
:
The LAN link is up and running at 1000 link speed, but is
currently idle.
•
Flickering Green
:
The LAN link is up and running at 1000 link speed and is
currently active. The LED flickers off with activity.
•
Solid Yellow
:
The LAN link is up and running at 10/100 link speed, but is
currently idle.
•
Flickering Yellow
:
The LAN link is up and running at 10/100 link speed and
is currently active. The LED flickers off with activity.
•
Off
:
No LAN link is detected.