Linksys WIP330 User Guide - Page 15
Installing and Using the Wireless-G IP Phone
UPC - 745883568208
View all Linksys WIP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Wireless-G IP Phone Chapter 3: Installing and Using the Wireless-G IP Phone Overview This chapter provides instructions for first-time installation and use of the IP Phone. You will insert the battery into the IP Phone and then set it up for your wireless network and Internet phone service. Then you will be able to make and receive Internet phone calls. Inserting the Battery into the Wireless-G IP Phone To insert the battery, follow these instructions: 1. Remove the cover of the battery compartment. Push down on the button and slide the cover downward. 2. Insert the battery. Make sure the metal contacts of the battery line up with the metal contacts of the battery compartment. 3. Insert the door and slide it upward until it snaps into place. Proceed to the next section, "Powering on the Wireless-G IP Phone." Metal Contacts Button Figure 3-1: Press Figure 3-2: Insert the Button the Battery Chapter 3: Installing and Using the Wireless-G IP Phone 7 Overview