Lowrance Elite-12 Ti Installation Manual EN - Page 18
Removing the unit from the quick release bracket, U-bracket mounting
View all Lowrance Elite-12 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Removing the unit from the quick release bracket Pull and hold the release handle and then pull the unit from the bracket. U-bracket mounting The ELITE-9Ti and ELITE-12Ti can be mounted with the U-bracket. 1. Place the bracket in the desired mounting location. Ensure that the chosen location has enough height to accommodate the unit fitted in the bracket, and allows tilting of the unit. Also adequate space is required on both sides to allow tightening and loosening of the knobs. 2. Mark the screw locations using the bracket as a template, and drill pilot holes. Use fasteners suited to the mounting surface material. If the material is too thin for self-tappers, reinforce it, or mount the bracket with machine screws and large washers. Use only 304 or 316 stainless steel fasteners. 3. Screw down the bracket. 4. Mount the unit to the bracket using the knobs. Hand tighten only. The ratchet teeth in the bracket and unit case ensure a positive grip and prevent the unit from changing from the desired angle. 18 Installation | ELITE Ti Installation Manual