Lowrance Elite-12 Ti Installation Manual EN - Page 40
Fuel flow configuration, Calibrate, Device list, Location, Uncon Reset Fuel Flow, Refuel
View all Lowrance Elite-12 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Fuel flow configuration Fuel flow configuration is not available on the ELITE-5Ti. After the number of engines is set, it is required to set which fuel flow sensor is connected to which engine. Under Device list on the Network page, view the Device Configuration dialog for each sensor, and set the Location to match the engine the device is connected to. Unconfigure - defaults the device which clears all user settings. Reset Fuel Flow - restores only the Fuel K-Value setting, if set in Calibrate. Only Navico devices can be reset. Calibrate Calibrating fuel flow is not available on the ELITE-5Ti. Calibration may be required to accurately match measured flow with actual fuel flow. Access calibration from the Refuel dialog. Calibration is only possible on Navico's Fuel Flow sensor. 40 Software Setup | ELITE Ti Installation Manual