Lowrance Elite-12 Ti Installation Manual EN - Page 28
NMEA 2000 backbone, NMEA 2000 Device connection - totalscan
View all Lowrance Elite-12 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Transducers fitted with a 9 pin connector can be plugged directly into the 9 pin port on the back of the unit. For 9 pin port location, refer to "Rear connections" on page 13. Ú Note: The connector attached to the transducer cable is keyed, and can only be inserted in one orientation. Once inserted, turn locking collar to secure. Ú Note: StructureScan HD, StructureScan 3D and TotalScan transducer installation instructions are included with the transducers. NMEA 2000 backbone Ú Note: All units, with the exception of the ELITE-5Ti, are equipped with a NMEA 2000 connector. This section does not apply to the ELITE-5Ti. NMEA 2000 Device connection The NMEA 2000 data port allows the receiving and sharing of a multitude of data from various sources. Ú Note: The ELITE-5Ti does not have a NMEA 2000 data port. 1 5 1 5 2 4 4 2 3 Unit socket (male) 3 Cable plug (female) Key Purpose 1 Shield 2 NET-S (+12 VDC) 3 NET-C (- 12 VDC) Color Drain Red Black 28 Wiring | ELITE Ti Installation Manual