Lowrance Elite-12 Ti Installation Manual EN - Page 39
StructureScan, Autopilot setup, Fuel setup, Vessel setup
View all Lowrance Elite-12 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
given for the same model transducer, refer to paperwork supplied with transducer to determine impedance. StructureScan This feature is automatically enabled when a TotalScan transducer is plugged in before the unit has been powered on. Autopilot setup Autopilot is not available on the ELITE-5Ti. Autopilot features will be enabled when a compatible MotorGuide trolling motor is connected. No special setup is required. See the operator manual for further details. Fuel setup This feature is not available on the ELITE-5Ti. The fuel utility monitors a vessel's fuel consumption. This information is totaled to indicate trip and seasonal fuel usage, and is used to calculate fuel economy for display on instrument pages and the data bar. To use the utility, a Navico Fuel Flow sensor, or a NMEA 2000 engine adaptor cable/gateway with Navico Fuel Data Storage device must be fitted to the vessel. Neither the Navico Fuel Flow sensor, nor the Suzuki engine interface require the use of a separate Fuel Storage device. Refer to the engine manufacturer or dealer for information on whether or not your engine provides a data output, and what adaptor is available to connect to NMEA 2000. Once the physical connection is made, ensure source selection is completed. Multiple engine installations using Fuel Flow sensors, or Fuel Data Storage devices, require setup of related engine location in the Device list. For general source selection information, refer to "Data source selection" on page 33. Vessel setup Vessel setup is not available on the ELITE-5Ti. The Vessel setup dialog must be used to select the number of engines, the number of tanks and vessel's total fuel capacity across all tanks. Software Setup | ELITE Ti Installation Manual 39