Lowrance HDS-5 Gen2 Installation Manual - Page 19
Assembling the Transducer bracket, One-piece bracket assembly, Two-piece bracket assembly
View all Lowrance HDS-5 Gen2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Assembling the Transducer bracket After determining the correct position for the ratchets, loosely assemble the transducer and bracket assembly as shown in one of the two diagrams below. One-piece bracket assembly Lock nut Metal washer Rubber washers Ratchets Metal washer Bolt Note: Do not tighten the transducer bracket assembly until you have aligned the transducer and bracket on the transom. Two-piece bracket assembly Ratchets Large flat washer Bolt Small flat washer Lock nut Thick rubber washer Note: Do not tighten the transducer bracket assembly until you have aligned the transducer and bracket on the transom. 18
18
Metal washer
Lock nut
Rubber washers
Bolt
Metal washer
Ratchets
Ratchets
Bolt
Small flat
washer
Thick rubber
washer
Lock nut
Large flat
washer
Assembling the Transducer bracket
After determining the correct position for the ratchets, loosely assemble the transducer and
bracket assembly as shown in one of the two diagrams below.
One-piece bracket assembly
Note:
Do not tighten the transducer bracket assembly until you have aligned the transducer
and bracket on the transom.
Two-piece bracket assembly
Note:
Do not tighten the transducer bracket assembly until you have aligned the transducer
and bracket on the transom.