Lowrance HDS-5 Gen2 Operation Manual - Page 109
Diagnostics, NMEA 2000 receive/send waypoint, Serial Ports
View all Lowrance HDS-5 Gen2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Settings Diagnostics screen: NMEA 2000 Diagnostics screen: UDB Diagnostics Displays diagnostic information on NMEA 2000 networks displays the status of information shared between units (UDB). From the UDB tab, you also can select a unit to be used as the master (primary) unit when sharing information. To access the Diagnostics screen, select Diagnostics from the Network menu and press enter. NMEA 2000 receive/send waypoint Turns on/off the unit's ability to send and receive waypoints across a NMEA 2000 network. NMEA 0183 receive waypoint controls the unit's ability to receive waypoints over a NMEA 0183 network. To turn on/off NMEA send/receive waypoint commands, highlight the desired NMEA send/ receive option and press enter. Serial Ports NMEA 2000 receive waypoint turned on Configures communication ports to send or receive data with another electronic device, like an autopilot. To configure serial ports: 1. Highlight Serial Ports on the Network menu and press enter. 2. Select the desired setting and press Enter. 3. Use the keypad to select the desired option and press enter. 4. Highlight OK and press enter. Serial settings menu 107