Lowrance HDS-5 Gen2 Operation Manual - Page 94
Bearing alignment
View all Lowrance HDS-5 Gen2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Settings Installation Adjustment Menu The installation adjustment menu is used to make adjustments to bearing alignment, range offset, antenna height and open array park angle. When the installation adjustment menu is accessed, press the keypad up/down to select a feature. Press the keypad left/right to make adjustments to a selected feature. Press Exit to return to the Radar Installation menu. To remove the Radar Installation menu from the screen, select Close and Adjustment Menu press enter. Bearing alignment Used to align the bow of your vessel with the heading line (zero point). Bearing alignment is also referred to as zero bearing. To make adjustments to bearing alignment, switch the radar state to Transmit and set radar orientation to Heading Up. To select Heading up orientation: 1. From the Radar Page, press MENU. 2. Select Orientation and press ENTER. 3. Use the keypad to select Heading Up and press ENTER. 4. Press EXIT. Before Bearing Alignment After Bearing Alignment Bow of ship is lined up with the tip of a peninsula; the bearing line is not. Bearing line aligned with peninsula, matching the alignment of the bow. 92