Lowrance HDS-5 Gen2 Operation Manual - Page 37
Start Logging, To stop logging, Stop Logging, Source, To share/receive sonar data
View all Lowrance HDS-5 Gen2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Sonar Start Logging A sonar log is a recording of sonar activity displayed on the sonar page. To record a sonar log, highlight the Start Logging button and press enter. When a sonar log is being recorded, a blinking red circle will be displayed in the upper left-hand corner of the screen and a logging message will appear periodically at the bottom of the screen. Indicator blinks when sonar is being recorded To stop logging: 1. Select Stop from the Sounder Logging menu and press enter. The Stop Logging menu will appear. 2. Highlight the Stop Logging button and press Enter. Stop Logging menu Source Allows you to select the sonar source for your unit. You can select your unit as the source, or choose another unit on your ethernet network, allowing you to share sonar returns from one unit with other units on the network. To share/receive sonar data: 1. Press Menu twice, select Sonar and press Enter. Make sure the units sharing sonar have network sonar turned on. 2. Press Exit twice. 3. Access the Sonar page, on the unit that will be sharing its sonar (master). 4. Press Menu, select Source and press Enter. 5. Select This unit and press Enter. 6. Press Exit. NOTE: To stop receiving shared sonar, turn off network sonar on the desired units. 35