MSI 790FX GD70 User Guide - Page 55
Resume From S3 By PS/2 Keyboard/ Mouse
UPC - 816909055665
View all MSI 790FX GD70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
MS-7577 Mainboard Power LED When ACPI Standby State is set to [S3], this item will appear and selectable. This item is used to select the indication method of Power LED. Power Button Function This feature sets the function of the power button. Settings are: [Power On/ Off]The power button functions as normal power off button. [Suspend] W hen you press the power button, the computer enters the suspend/sleep mode, but if the button is pressed for more than four seconds, the computer is turned off. Restore On AC Power Loss This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [OFF] Always leaves the computer in the power off state. [ON] Always leaves the computer in the power on state. [Last State] Restores the system to the status before power failure or interrupt occurred. Wake Up Event Setup Press and the following sub-menu appears. Wake Up Event By The item allows you to wake up event by BIOS or OS. Resume From S3 By USB Device The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. Resume From S3 By PS/2 Keyboard/ Mouse This setting determines whether the system will be awakened from what power saving modes when input signal of the PS/2 keyboard/ mouse is detected. Resume By PCI Device (PM E#) W hen set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PME (Power Management Event). 3-14