MSI H77MA User Guide - Page 46
Advanced, Suspend to RAM. Turns off hardware. Recommended
View all MSI H77MA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
BIOS Setup Advanced ▶ PCI Subsystem Settings Press to enter the sub-menu. ▶ PCIE GEN3 This item is used to enable/ disable the PCIe generation 3 support. ▶ PCI Latency Timer Controls how long each PCI device can hold the bus before another takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. ▶ ACPI Settings Press to enter the sub-menu. ▶ ACPI Standby State Specifies the power saving mode for ACPI function [S1] Sleep Mode. Hardware remains on. [S3] Suspend to RAM. Turns off hardware. (Recommended) ▶ Power LED Configures how the system uses power LEDs on the case to indicate sleep/ suspend state. [Single] The power LED turns off during the sleep/suspend mode. [Dual] The power LED changes its color to indicate the sleep/suspend state. [Blinking] The power LED blinks to indicate the sleep/suspend state. ▶ Integrated Peripherals Press to enter the sub-menu. ▶ Onboard Lan Controller This item allows you to enable/ disable the onboard LAN controller. ▶ LAN Option ROM This item is used to decide whether to invoke the Boot ROM of the onboard LAN. ▶ SATA Mode This item is used to specify RAID/ IDE/ AHCI mode for SATA port. Important You cannot switch between AHCI and IDE if you already have your operating system installed. If you have installed your OS using AHCI and you clear your BIOS/reset to default settings, you will need to change this function back to AHCI to ensure proper functionality. ▶ SATA1~6 Hot Plug These items are used to enable/ disable the SATA ports hot plug support. ▶ HD Audio Controller This item allows you to enable/ disable the HD audio controller. 2-6