MSI K9N2G User Guide - Page 21
Installing memory Modules
UPC - 816909045710
View all MSI K9N2G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Hardware Setup Installing memory Modules 1. The memory module has only one notch on the center and will only fit in the right orientation. 2. Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. Important You can barely see the golden finger if the memory module is properly inserted in the DIMM slot. 3. The plastic clip at each side of the DIMM slot will automatically close. Volt Notch Important - DDR2 modules are not interchangeable with DDR and the DDR2 standard is not backwards compatible. You should always install DDR2 memory modules in the DDR2 DIMMs and DDR memory modules in the DDR DIMMs. - In dual-channel mode, make sure that you install memory modules of the same type and density in different channel DDR DIMMs. - To enable successful system boot-up, always insert the memory modules into the DIM M1 first. 2-7