Magellan GPS 315 User Manual - Page 23

Setting Up the Plotter This menu allows you to change the orientation, turn the plot rings on or off, set the course projection and set the plotter scale. Setting Plotter Orientation. From PLOT screen MENU Select PLOT SETUP ENTER Select ORIENTATION ENTER FIG. A Select orientation ENTER Turning Plot Rings On or Off. You may want to estimate the distance to a point on the plotter. To assist you, turn the PLOT RINGS option on. The distance between each plot ring is equal to the scale, therefore, at most you will see a portion of 2 rings at one time. From PLOT screen MENU Select PLOT SETUP ENTER Select ENTER PLOT RINGS Select on or off ENTER Setting Up Course Projection. You may want to know where you will be after a specified period of time based on your current speed and heading. From PLOT screen MENU Select PLOT SETUP ENTER Select COURSEPROJ ENTER FIG. B Select time ENTER A solid black line will appear starting from your position to the projected position. WPOTRNIEANMTES OTRFAFCK UP OCONURSE UP NORTH UP Figure A. You can choose from TRACK UP (direction you are moving at the top of the screen), COURSE UP (destination of the current leg at the top of the screen) and NORTH UP (north at the top of the screen). PWRPOTJENCATMIOESN OFF 1OMN INUTE 2 MINUTES 5 MINUTES 10 MINUTES Figure B. You can choose from OFF, 1, 2, 5 and 10 minutes. Magellan GPS 315/GPS 320 15