Makita EK7301 Owners Manual - Page 30

Instructions for periodic maintenance To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be performed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the prescribed maintenance work can lead to accidents! Users of the Power Cut must not perform any maintenance work not described in this operator's manual. All such work must be carried out by a MAKITA service center. Page General Entire Power Cut Cutting disc Clutch Protection hood Clean exterior, check for damage. In case of damage, have repaired by a qualified service center immediately Inspect regularly for damage and wear. 7 Have inspected at a service center. Clean, Check position (impact plate) 18 Before each start Cutting disc V‑belt Protective hood Combination switch, Safety locking button, Throttle lever Tank cap Inspect for damage and make sure the cutting wheel is right for the job 7 Check V‑belt tension 15 Adjust position Functional check Functional check Functional check 18 Check for tightness and lekages Every day Air filter Idle speed Extreme dust Clean (if necessary more frequently); pre-filter (foam) maintenance as described above under Cleaning / changing the air filter 22-23 Check (cutting disc must not turn on idle) 20 Clean filter insert (paper cartridge) 22-23 Every week Starter housing Starter cable V‑belt Air filter insert Spark plug Muffler Clean to ensure proper air cooling Check for damage Check V‑belt tension, inspect for damage and wear Clean, replace after 100 operating hours Check and replace if necessary Check tightness of mounting, clean or replace spark arrester screen if necessary 13 25 15, 21 22-23 24 13 / 28 Every 3 months Suction head Replace 24 Fuel tank Clean Annually Entire Power Cut Check at an authorized service center Storage Entire Power Cut Cutting disc Fuel tank Carburetor Clean exterior, check for damage. In case of damage, have repaired by a qualified service center immediately Remove and clean 14 Empty and clean Run empty Service, spare parts and guarantee Maintenance and repair The maintenance and repair of modern cutoff saws and their safety‑related components requires qualified technical training and a workshop equipped with special tools and testing devices. We therefore recommend that you consult a MAKITA service center for all work not described in this operator's manual. The MAKITA service centers have all the necessary equipment and skilled and experienced personnel, who can work out cost-effective solutions and advise you in all matters. Please contact your nearest service center (list enclosed) or the general trading company or importer (see last page), who will gladly provide you with the address of your nearest MAKITA service center. Spare parts Reliable long-term operation, as well as the safety of your Power Cut, depend among other things on the quality of the spare parts used. Use only original MAKITA parts, marked Only original parts are from the same production line as the original unit and therefore ensure the highest possible quality of materials, dimensions, functioning and safety. Only original spare parts and accessories guarantee the highest quality in material, dimensions and function. Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations. Please bear in mind that if parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA product guarantee. We will furthermore not accept any liability damages arising from the use of non-MAKITA spare parts. 30