Marantz SR9600 SR9600 User Guide - Page 9

@3 DISPLAY button When this button is pressed, the FL display mode is changed as follows : Normal display → Level meter→ Auto display off → Display off → Normal display. The display off indicator "DISP" is illuminated when Display off is selected. @4 MRAC button/MIC jack Press this button to automatically measure speaker characteristics using the included microphone (MC-10). (See page 36) @5 SPEAKER A/B button Press this button to select speaker system A and/or B. @6 INFRARED receiver window This window receives infrared signals for the remote control unit. @7 INFRARED transmitter window This window transmits infrared signals for the remote control unit. Opening and closing the front panel door When you want to use the controls behind the front panel door, open the door by gently pressing on the lower part of the panel. Keep the door closed when not using these controls. Caution: • Be careful not to pinch your fingers between the door and the panel. FL DISPLAY AND INDICATOR fg h jk l ¡0 ¡1 Normal display MULTI A.B.SPK SPKR A.B PEAK ATT SLEEP V-OFF Re-EQ NIGHT HDMI d DVD:AT-HDMI 2 s DOLBY DIGITAL EX a ¡8 When the display is OFF DISP ¡2 ¡3 ¡4 i.LINK DIGITAL DIGITAL SURROUND ¡5 LCR dB LFE ¡6 +18.0 SL S SR ¡7 When operating the SR9600 as a tuner ANALOG ¡3 AUTO TUNED ST a DISP (Display Off) indicator This indicator is illuminated when the SR9600 display is turned off. s SURROUND mode / i.LINK indicator This indicator is illuminated to show that the surround mode is in use. It also displays i.LINK information.(See page 28) d Main Information Display This display shows messages relating to the status, input source, tuner, audio input mode or other aspects of unit's operation. f SLEEP timer indicator This indicator is illuminated when the sleep timer function in the main room is in use. g Multiroom system indicator This indicator is illuminated when the multiroom system is active. h V (Video)-OFF mode indicator This indicator is illuminated when the Video off mode is selected. j SPKR (Speaker) A/B indicator This indicator displays which speaker system is active. ¡4 TUNED ST k Re-EQ indicator This indicator is illuminated in the Re-EQ mode. l NIGHT mode indicator This indicator is illuminated when the SR9600 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels. ¡0 PEAK indicator This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than what the internal processor can hold, this is illuminated If this happens, you should press the ATT button on the remote control unit. (See page 12) ¡1 ATT (Attenuation) indicator This indicator is illuminated when the attenuation function is active. ¡2 HDMI/i.LINK indicator HDMI This indicator is illuminated when the audio signal input from the HDMI jacks is being played back. i.LINK This indicator is illuminated when the audio signal input from the i.LINK connector is being played back. Note: • This indicator flashes if the input signal cannot be detected. ¡3 DIGITAL/ANALOG input indicator DIGITAL This indicator is illuminated when a digital input has been selected. ANALOG This indicator is illuminated when an analog input source has been selected. ¡4 SIGNAL FORMAT and TUNER indicators 2 DIGITAL This indicator is illuminated when a Dolby Digital signal is input. EX This indicator is illuminated when a Dolby Digital EX signal is input. dts This indicator is illuminated when a DTS signal is input. ES This indicator is illuminated when a DTS ES signal is input. 96/24 This indicator is illuminated when a DTS 96/24 signal is input. PCM This indicator is illuminated when the input signal is PCM (pulse code modulation). HDCD This indicator is illuminated when the input signal is from a HDCD. Sampling frequency This indicator displays the sampling frequency when a PCM or multi channel PCM signal is input. 32, 44.1 and 48 kHz are not displayed. SA-CD This indicator is illuminated when the input signal is from a SACD. M-PCM This indicator is illuminated when the input signal is multi channel PCM. AUTO This indicator is illuminated when the tuner's auto mode is in use. TUNED This indicator is illuminated when a station is being received with sufficient signal strength to provide acceptable listening quality. ST (Stereo) This indicator is illuminated when an FM station is being received in stereo. 7 ENGLISH