Marantz VP-15S1 VP-15S1 User Manual - Page 14

ENGLISH Remote Controller ¡5 THEATER (THTR) button ( P.24) ™6 CINEMA button ( P.26) Select the Theater picture mode. Turns the 2-3 pull down mode on and off. a sdfg hjk l ¡0 ¡1 STANDBY ON IRIS LAMP C.TEMP GAMMA COMP.1 COMP.2 S-VIDEO USER C1 C2 S G1 HDMI 1 HDMI 2 VIDEO H1 H2 V G2 a STANDBY button ( P.20) Turn the projector off. ™9 s IRIS button Switches lens and illumination aperture. Theater mode is designed for high fidelity black appearance and is good for movie pictures. Every time THTR button is pressed, the selection rotates in the order of Theater 1 ➔ Theater 2 ➔ Theater 3 ➔ Default. ¡6 STANDARD (STD) button ( P.24) ™7 FULL button ( P.18) Sets aspect ratio to full mode. ™8 NORMAL button ( P.18) Sets aspect ratio to normal mode. £0 d LAMP button Select the STANDARD picture mode. Standard mode is good for normal pictures. ™9 ON button ( P.18) £1 Switches the lamp between the normal and Every time the button is pressed, the selection Turn the projector on. ¡2 ¡3 ¡4 AUX 1 AUX 2 A1 A2 RGB G3 £2 energy-saving modes. rotates in the order of Standard 1 ➔ Standard 2 ➔ Standard 3 ➔ Default. £0 USER G1 button ( P.24) ¡5 ¡6 ¡7 ¡8 ¡9 ™0 ™1 ™2 THTR STD DYN G4 BLANKING B1 B2 B3 OFF V-MUTE MENU M £3 f C.TEMP button Selects the user mode. £4 £5 £6 £7 Sets color temperature to 1, 2, 3, 4, 5 or HB. g GAMMA button Sets the gamma curve to Theater, Standard, Dynamic, A, B, C, D or E, when the picture mode is set to User. ¡7 DYNAMIC (DYN) button ( P.24) Select the Dynamic picture mode. Dynamic mode is good for visually dynamic pictures. Every time the button is pressed, the selection rotates in the order of Dynamic 1 ➔ Dynamic 2 ➔ The user mode is for enjoying images at a userselected gamma curve. Every time the button is pressed, the selection rotates in the order of User 1 ➔ User 2 ➔ User 3. For more information on how to select gamma curve. ( P.25) ™3 ENTER INPUT Dynamic 3 ➔ Default. ™4 ™5 A ASPECT I INFO. CINEMA VCR MODE BLACK LEVEL PATTERN £8 h COMP. 1 (Component video in 1) button ( P.18) Selects the device connected to the COMPONENT ¡8 B1 button ( P.29) Selects Blanking Memory 1. £1 USER G2 button ( P.24) Selects the user mode. The user mode is for enjoying images at a userselected gamma curve. ™6 ™7 ™8 BLACK FULL NOR ZOOM THRU £9 VIDEO IN 1 jack as the input source. ¢0 j COMP. 2 (Component video in 2) ¡9 B2 button ( P.29) Selects Blanking Memory 2. Every time the button is pressed, the selection rotates in the order of User 4 ➔ User 5 ➔ User 6. For more information on how to select gamma ¢1 button ( P.18) Selects the device connected to the COMPONENT ™0 B3 button ( P.29) VIDEO IN 2 jack as the input source. Selects Blanking Memory 3. curve. ( P.25) £2 USER G3 button ( P.24) REMOTE CONTROLLER RC-11VPS1 k S-VIDEO button ( P.18) Select the S-VIDEO IN signal. l HDMI 1 button ( P.18) Select the HDMI 1 IN signal. ™1 OFF button ( P.29) Turns the blanking mode off. ™2 V-MUTE button Turn the picture into black. Press again to resume. Selects the user mode. The user mode is for enjoying images at a userselected gamma curve. Every time the button is pressed, the selection rotates in the order of User 7 ➔ User 8 ➔ User 9. For more information on how to select gamma curve. ( P.25) ¡0 HDMI 2 button ( P.18) Select the HDMI 2 IN signal. ¡1 VIDEO button ( P.18) Select the VIDEO IN signal. ¡2 A1 button This button does not work with this projector. ¡3 A2 button This button does not work with this projector. ™3 3 / 4 / 1 / 2 / ENTER buttons Press the cursor buttons (3 [UP], 4 [DOWN], 1 [LEFT], 2 [RIGHT]) to select menu items. Press the ENTER button to enter the selected menu item. ™4 ASPECT (Aspect select) button ( P.18) Selects the aspect ratio. Every time the button is pressed, the selection rotates in the order of Full ➔ Normal ➔ Zoom ➔ V-Stretch ➔ Through. ™5 VCR MODE button ( P.26) £3 USER G4 button This button does not work with this projector. £4 LIGHT button Lights all buttons for about 10 sec. £5 MENU button ( P.21) Display the on-screen menu. If pressed again, the on-screen menu disappears. £6 INFO. button ( P.31) ¡4 RGB button ( P.18) Turns the VCR mode on and off. Turn the information menu on or off. Select the RGB IN signal. 6