Marantz VP-15S1 VP-15S1 User Manual - Page 37

ENGLISH OSD/Blanking Standard 1 Picture Adjust Fine Menu 1 Fine Menu 2 Input Signal RGB/HD Adjust HDMI Display OSD/Blanking Config. Menu Position Top-L Language English Status Info. Enable Power-OFF Confirm. Disable Blanking Memory Memory 1 Blanking Top 0 Blanking Bottom 0 Blanking Left 0 Blanking Right 0 Item Menu Position Language Status Info. Power-OFF Confirm. Blanking Memory Blanking Top Blanking Bottom Blanking Left Blanking Right Adjustments Top-L, Top, Top-R, Center-L, Center, Center-R, Bottom-L, Bottom, Bottom-R English, Deutsch, Français, Español, Português, Italiano Enable, Disable Enable, Disable Off, Memory 1, Memory 2, Memory 3 0 100 0 100 0 100 0 100 - Blanking Top, Bottom, Left and Right Set the blanking width of the top, bottom, left and right masks, which are then memorized in Memory 1 - 3 of Blanking Memory. Each can be set from 0 (no mask) to a maximum 100. - Menu Position OSD position is selected from 9 positions. - Status Info. Enable: Displays the current status of the projector for a set amount of time in the upper right-hand corner of the screen at startup and whenever the Input Source, Picture Mode, Aspect ratio or other setting is changed. Disable: Does not display Status Info. - Power-OFF Confirm. Disable: Directly puts the projector on standby without displaying the confirmation message when power is shut off from the button on the remote controller or the /I button on the projector. Enable: Displays a confirmation message asking whether to shut the power off or continue use when power is shut off from the button on the remote controller or the /I button on the projector. To shut off the power immediately, select "Yes" and press the ENTER button. To not shut off the power, select "No" and press the ENTER button. - Blanking Memory Sets the blanking mode with which part of the screen can be hidden in black bands. To use this mode or change the setting, select from Memory 1 to 3. Off: Turns the blanking mode off. No masking occurs. Memory 1-3: Memorize the blanking width of the top, bottom, left and right masks set with the below features. Up to three settings can be memorized. 29