Marantz VP-15S1 VP-15S1 User Manual - Page 34

ENGLISH Fine Menu 1 By adjusting this Fine Menu, you can make fine picture adjustment. Standard 1 Picture Adjust Fine Menu 1 Fine Menu 2 Input Signal RGB/HD Adjust HDMI Display OSD/Blanking Config. Noise Reduction 0 R Gain 0 G Gain 0 B Gain 0 R Bias 0 G Bias 0 B Bias 0 Luminance Gain 0 Chroma Delay 0 Item Noise Reduction R Gain G Gain B Gain R Bias G Bias B Bias Luminance Gain Chroma Delay Adjustments 0 50 -50Ô 0Ô 50 -50Ô 0Ô 50 -50Ô 0Ô 50 -50Ô 0Ô 50 -50Ô 0Ô 50 -50Ô 0Ô 50 -50Ô 0Ô 50 -5Ô 0Ô 5 - Noise Reduction Adjust the noise reduction. - R Gain This menu allows the users to set the gain for red. - G Gain This menu allows the users to set the gain for green. - B Gain This menu allows the users to set the gain for blue. - R Bias This menu allows the users to set the bias for red. - G Bias This menu allows the users to set the bias for green. - B Bias This menu allows the users to set the bias for blue. - Luminance Gain This menu allows the users to set the luminance gain. - Chroma Delay This menu allows the users to set the chrominance delay. Note : • The settings made in Fine Menu 1 are saved in the currently selected Picture Mode index (Default excluded). 26 Fine Menu 2 Standard 1 Item Adjustments Picture Adjust Fine Menu 1 Fine Menu 2 Input Signal RGB/HD Adjust HDMI Display OSD/Blanking Config. Aspect Cinema VCR Mode Black Level FRC CEC Picture Shift V Overscan Full Auto On 0 IRE Auto 1 Off 0 Enable Aspect Cinema VCR Mode Black level FRC Full, Normal, Zoom, V-Stretch, Through Auto, Off On, Off 0 IRE, 7.5 IRE /Expand, Normal (For HDMI input) Auto 1, Auto 2, 60Hz, 50Hz, 48Hz CEC On, Off Picture Shift V -50Ô 0 Ô 50 - Cinema Overscan Enable, Disable Auto : Automatically selects the cinema mode when a video signal is input. NTSC: 3-2 pull down, PAL: 2-2 pull down Off : Pull-down processing is not performed. - VCR Mode On : A projector is forced into the intra-field only deinterlacing mode. Off : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown for 625/50 sources). - Black level Select the black level by a video source. - FRC (Frame Rate Conversion) Auto 1 : Frame Rate Conversion function is basically off. However FRC turns on automatically depending on vertical frequency of input signal. Normally, use this mode. Auto 2 : Use this mode when the image stops momentarily. 60Hz : Frame Rate Conversion function is "On". (59.94Hz fixed) 50Hz : Frame Rate Conversion function is "On". (50.00Hz fixed) 48Hz : Frame Rate Conversion function is "On". (47.95Hz fixed) - CEC (Chroma Error Correction) On : Reduces CUE (Chroma Up-sampling Error) of 1080i signals. Off : Normally, use this mode. - Picture Shift V When Aspect on the Picture Adjust menu is set to "Zoom" or "V-Stretch", this setting allows the user to move the projected image vertically in order to see parts on the image not appearing on the screen. - Overscan Selects whether to show or hide picture borders with NTSC, PAL, SECAM, 480i, 480p, 576i and 576p signals. Enable: Does not display borders of image signals. (Normally, use this mode.) Disable: Displays the entire image signal. Notes : • There are some parameters can not adjust according to input signal. • The settings made in Fine Menu 2 are saved in each currently selected input signal source.