Marantz VP8000 VP8000 User Manual - English - Page 16

ENGLISH RGB Format For an RGB input signal, carry out the following steps: 1. Connect a SVGA computer. 2. Select the RGB IN using RGB key on the remote controller or INPUT key on the projector. The RGB FORMAT menu appears. 3 ( # ɹ ' 0 3 . " 5
4&-&$5ɹ'03."5
7&4 45%
.&.03 645ɹ'03."5
.&.03:ɹɹɹ 3. Select a format from VESA #601, 602, 603, MEMORY 1, 2, and 3, and press the ENTER key. 4. The following menu appears. When found no need to adjust, select "YES" in ten seconds, and press the ENTER key, then the RGB signal is projected properly. Otherwise select "No", and press the ENTER key, and the RGB FORMAT menu appears. %*41-":ɹ0,ʁ :&4ɹ/0 5. Select another format, and try again step 3 and 4. 6. When there is no selectable format left, go to the ADJUST FORMAT in the RGB FORMAT menu. Select a MEMORY from MEMORY 1, 2 and 3, and press the ENTER key. The RGB ADJUST menu appears. 3 6 4 5 .&.03: )104*5*0/
 7104*5*0/
 8*%5)
."9 1)"4&
 $0/53"45
 8)*5&
0/ &/)"/$&3 OPERATIONS 7. Use the į/Ĭ keys to select an item. Use the ǡ/Ǡ keys to change the adjustment level. í H-POSITION Adjust the horizontal position of the image. í V-POSITION Adjust the verticall position of the image. í WIDTH Adjust the width of the image. í PHASE Adjust the clock phase to reduce video noise, dot interference, or cross talk. 8. Press the ENTER key and select "YES", then the adjusted data are stored in the memory which you selected in the step 6. 15