Marantz VP8000 VP8000 User Manual - English - Page 17
Lamp Life and Replace Lamp - replacement lamp
![]() |
View all Marantz VP8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ENGLISH Lamp Life and Replace Lamp LAMP LIFE You can display the lamp life remaining at any time. Press the OSD key on the remote controller.The menu appears. LAMP LIFE is on the bottom line of the menu. 7*%&0*/165 $0.10/&/5 7*%&04&55*/( /03."-45% %*(;00. 0'' 4.005)*/( 0'' /0*4&3&%6$5*0/ 0'' 8)*5&&/)"/$&3 0'' "41&$5 426&&;& 04%.0%& 8*%& -".1-*'& )0634 Notes • When the LAMP LIFE is less than 1000 HOURS, it is recomended to replace the lamp unit. A lamp may be wornout when the LAMP LIFE is less than 1000 HOURS. • The projector is designed not to turn on after the lamp use has exceeded 2000 hours. (LAMP LIFE 0 HOUR) If the projector is in use, it will turn off. Ǡ When the lamp expires in about 100 hours, the lamp life remaining is displayed on the screen when the projector is on. OPERATIONS Ǡ When the lamp life has expired (LAMP LIFE 0 HOURS), the projector will be immediately turned off and the WARNING indicator will blink in orange. 8"3/*/( -".1ɹ-*'&ɹɹ)063 Use the following procedure to reset (initialize) the lamp life indicator when replacing the lamp with a new one: 1. Unplug the power cord. 2. Wait about one minute and reconnect the power cord. 3. Press the POWER key. Only the POWER key will be of effect. The following message appears for 120 seconds. 3&1-"$&ɹ-".1ʂ 3&4&5-".1-*'&ɹ:&4ɹ/0 8"3.ɹ61 -".1 0634 4. Select "YES", using the ǡ/Ǡ keys. 5. Press the ENTER key. The lamp life indicator is now initialized. Ǡ When the lamp life expires in about 5 hours, the limp life remaining is displayed on the screen at one hour interval. 8"3/*/( -".1ɹ-*'&ɹɹ)0634 To clear the menu above, press the MENU key. 16
![](/manual_guide/products/marantz-vp8000-vp8000-user-manual-english-3fc4046/17.png)