Marantz VP8000 VP8000 User Manual - English - Page 18

ENGLISH ADDITIONAL INFORMATION MAINTENANCE Replacing the Lamp Unit CAUTION: • Do not touch the lamp and the lamp unit. It will be extremely hot. Allow at least one hour for the lamp to cool down before handling. • Do not loosen any screws except for those mentioned below. • The lamp may break if handled improperly. • Do not use a lamp housing other than a Marantz replacement lamp unit. WARNING: • The lamp may be hot. Be careful when handling. 1. Press the POWER key to turn the projector off. 2. Unplug the AC power cord. 3. Wait at least one hour for the lamp and lamp unit to cool down. 4. Turn the projector upside down carefully. (Read the caution and warning labels on the lamp cover.) 5. Loosen the lamp cover securing screw. 6. Remove the lamp cover. 7. Loosen the three lamp housing screws. (This projector has a safety switch.) 8. Hold the handle then pull the lamp unit upward to remove it. 9. Install the new lamp unit. 10.Secure the lamp unit with the three screws. 11.Replace the lamp cover and secure it with a screw driver. Cleaning the lens If the lens becomes dirty or smudged, clean it with a soft dry cloth. Do not use a dampcloth, detergent solution, or thinner. Use optical lens cleaners only which are approved for eyeglasses or cameras. Replacement parts When replacement parts are required, be sure to inform only a Marantz authorized service center. Only the use of replacement parts specified by Marantz,which has the same characteristics as the original parts, is allowed. Unauthorized substitutions may result in fire, electric shock, or other hazards. Otherwise the warranty may not be guaranteed. Optional accessories { Lamp Unit: LU8000VP { Ceiling Mount KIT: RM8000VP CAUTION: • For ceiling installation, consult with the Marantz dealer. 17