Meade ETX-90 User Manual - Page 7
Attaching Accessories
View all Meade ETX-90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
GETTING STARTED Attaching Accessories Your Telescope is now Fully Assembled 8 Be sure the telescope master power switch is in the off position. Remove the ETX90 handbox and the coiled interface cable from the packing materials. Plug one end into the HBX port of the control panel and plug the other end into the Handbox port on the ETX90 handbox. Now remove the dust cover from the front of the telescope tube. Be careful not to touch the glass lens. 9 Place the 26mm eyepiece into the eyepiece holder on the telescope and tighten the attachment thumbscrew to a "firm feel" only. Flip the Power Switch on the computer control panel to the ON position. The copyright message lights on AutoStar's LCD display. "Press 0 to align or Mode for Menu" displays. You Slew Speeds: Speed 9: Fast . . . Speed 5: Medium . . . Speed 1: Slow Arrow Keys Number Keys can use the Arrow keys to slew (move) the telescope up, down, right, or left. To change the telescope's slew speed, press a Number key. "9" is the fastest speed and "1" is the slowest speed. See page 20 for more Slide the Red Dot Viewfinder into the slotted holder on the top surface telescope and tighten the attachment details. Or you can Press "0" to begin Easy Alignment. See page 11 for more information. thumbscrew to a "firm feel" only.