Miele Boost CX1 Operating instructions/Installation instructions - Page 18
can lose their effect.
View all Miele Boost CX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
en-US The flap will open and the dust will fall out. If you need to clean the dust container, use a slightly damp cloth and mild liquid dish soap. Dry the dust container carefully. Close the flap firmly. It should click into place. Insert the dry dust container back into the vacuum cleaner at an angle with the handle lifted up (Fig. 28). Latch the dust container into place by pushing the handle back down. Cleaning the fine dust filter (Figs. 29-36) The fine dust filter is located on the rear side of the dust container. It is equipped with a filter mat. Clean the filter when necessary and whenever you notice a reduction in suction power. Clean both filters with water once a month and allow a drying time of 24 hours. Remove the dust container (Fig. 26). The fine dust filter is located at the rear of the dust container. Remove the fine dust filter in the direction of the arrow (Fig. 29). Remove the filter mat from the fine dust filter (Fig. 30). Carefully knock the dust out of both filters over a trash can. Take the cleaning tool out of the side flap on the dust container (Fig. 31). Clean the pleated side of the fine dust filter with the long brushes on the cleaning tool (Fig. 32). Risk of damage caused by incor- rect cleaning. The fine dust filter and the filter mat can become damaged. Both filters can lose their effect. Do not use pointed or sharp-edged objects to clean the fine dust filter and the filter mat. Clean the pleated side of the fine dust filter and the filter mat with water once a month. Rinse the pleated side of the fine dust filter under cold running water (Fig. 33). Clean the filter mat under cold running water (Fig. 34). Risk of damage caused by incor- rect cleaning. The fine dust filter and the filter mat can become damaged. Both filters can lose their effect. Do not use liquid dish soap or cleaning brushes when cleaning the pleated side of the fine dust filter with water. After cleaning, allow the fine dust filter to dry in a well ventilated room for a minimum of 24 hours with the ribbed side facing up. Choose a well ventilated room. After cleaning, also allow the filter mat to dry for a minimum of 24 hours. 18