Miele Boost CX1 Operating instructions/Installation instructions - Page 44

The dust container is full.

Get Miele Boost CX1 PDF manuals and user guides View all Miele Boost CX1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

en-CA Frequently Asked Questions With the help of the following guide, minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This will save you time and money because you won't need a service call. This guide may help you find the reason for the fault and help you correct it.  Risk of electric shock from voltage. The supply voltage is applied to the appliance even if it is switched off. Before dealing with any problems, unplug the appliance from the electrical socket. Problem The vacuum cleaner turns off automatically. The cleaning performance is poor. Cleaning performance is reduced. Possible cause and solution A temperature limiter switches the vacuum cleaner off automatically if it gets too hot. This can occur when the airways are blocked by bulky objects.  Switch the vacuum cleaner off immediately using the  On / Off footswitch. Unplug the vacuum cleaner from the electrical socket. After removing the cause of the fault, wait for approximately 20-30 minutes to allow the vacuum cleaner to cool down. It can then be turned on again. The dust container is full.  Empty and clean the dust container (see "Maintenance" - "Emptying and cleaning the dust container"). The fine dust filter is soiled.  Clean the fine dust filter and the filter mat (see "Maintenance" - "Cleaning the fine dust filter"). The filter frame / pre-filter is soiled.  Clean the filter frame / pre-filter (see "Maintenance" - "Cleaning the filter frame / prefilter"). 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
en-CA
44
Frequently Asked Questions
With the help of the following guide, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be remedied
without contacting the Service Department. This will save you time and money
because you won't need a service call.
This guide may help you find the reason for the fault and help you correct it.
Risk of electric shock from voltage.
The supply voltage is applied to the appliance even if it is switched off.
Before dealing with any problems, unplug the appliance from the electrical
socket.
Problem
Possible cause and solution
The vacuum cleaner
turns off automatically.
A temperature limiter switches the vacuum cleaner
off automatically if it gets too hot. This can occur
when the airways are blocked by bulky objects.
Switch the vacuum cleaner off immediately using
the
 On / Off footswitch. Unplug the vacuum
cleaner from the electrical socket.
After removing the cause of the fault, wait for
approximately 20–30 minutes to allow the vacuum
cleaner to cool down. It can then be turned on again.
The cleaning
performance is poor.
The dust container is full.
Empty and clean the dust container (see
“Maintenance” – “Emptying and cleaning the dust
container”).
Cleaning performance
is reduced.
The fine dust filter is soiled.
Clean the fine dust filter and the filter mat (see
“Maintenance” – “Cleaning the fine dust filter”).
The filter frame / pre-filter is soiled.
Clean the filter frame / pre-filter (see
“Maintenance” – “Cleaning the filter frame / pre-
filter”).