Miele Boost CX1 Operating instructions/Installation instructions - Page 38
On / Off footswitch.
View all Miele Boost CX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
en-CA Adjusting the floorhead (Figs. 16 + 17) Depending on the model, your vacuum cleaner will be fitted as standard with one of the floorheads illustrated. This vacuum cleaner can be used for daily cleaning of carpets, rugs, and robust hard floors. Miele offers a range of other floorheads, brushes, and accessories for other types of flooring and special applications (see "Optional accessories"). Please observe the flooring manufacturer's cleaning and care instructions. Clean even hard floors which are not susceptible to scratching, as well as flooring with gaps or deep crevices in it, with the brush protruding: Press the footswitch. Vacuum carpets and rugs with the brush retracted: Press the footswitch. If the suction power of the adjustable floorhead seems too high, reduce the suction until the floorhead is easier to manoeuvre (see "Use" - "Regulating the suction power"). Adjustable floorhead (Fig. 18) The adjustable floorhead can also be used for vacuuming the stairs. Risk of injury caused by falling vacuum cleaner. You may be injured if the vacuum cleaner should fall from the stairs. When vacuuming stairs, it is best to start at the bottom of the stairs and move up. Unwinding the power cable (Fig. 19) Pull the power cable out to the required length. Insert the plug into the electrical socket. Risk of damage due to overheating. The power cable may overheat after a long period of use. If vacuuming for longer than 30 minutes, the power cable must be pulled out all the way. Rewinding the power cable (Fig. 20) Remove the plug from the electrical socket. Press the cable rewind footswitch. The power cable will rewind automatically. Switching on and off (Fig. 21) Press the On / Off footswitch. During vacuuming During vacuuming, pull the vacuum cleaner behind you like a sledge. 38